Tag Archives: gearbox motor speed reducer

China Professional China Factory Customization High Payload Motor Reducer Agriculture 2 Speed Gearbox wholesaler

Product Description

China Factory customization high payload motor reducer agriculture 2 speed gearbox

HangZhou Fubao Electromechanical Technology Co., Ltd.WF series motor reducer agriculture 2 speed gearbox for 5 axis machining center developed and manufactured by WEITENSTAN together with German and ZheJiang technicians for many years.

High precision miniature cycloidal gearbox has the characteristics of smaller, ultra-thin, lightweight and high rigidity, anti-overload and high torque. With good deceleration performance, smooth operation and accurate positioning can be achieved. Integrated design, can be directly connected with the motor, to achieve high precision, high rigidity, high durability and other advantages. It is designed for high speed ratio, high geometric accuracy, low motion loss, large torque capacity and high stiffness applications. The compact design (minimum OD ≈40mm, currently the world’s smallest precision cycloidal pin-wheel reducer) allows it to be installed in limited Spaces.

The design of WEITENSTAN high-precision reducers is based on a new reduction principle and newly developed radial and axial output bearings. The result is a new generation of power transmission systems. The new drive concept allows WEITENSTAN gear units to be used directly in the gears of robot joints, rotary tables and various transport systems.

WEITENSTAN high-precision reducers are designed for applications requiring large speed ratios, high precision, low-loss motion, high torque capacity, and high rigidity. At the same time, they are compact in design, can be installed in limited spaces, and have small inertia.

Reducer drawings

Detailed Photos

Product Advantage

China Factory customization high payload motor reducer agriculture 2 speed gearbox

advantages:

1, fine precision cycloidal structure

Ultra flat shape is achieved through differential reduction mechanism and thin cross roller bearing, contributing to the compact size of the equipment. The combination of small size and unmatched superior parameters achieves the best combination of performance, price and size (high cost performance).

2. Excellent accuracy (transmission loss ≤1 arcmin)

Through the complex meshing of precision cycloid gear and high precision roller pin, higher transmission accuracy is achieved while maintaining small size and high speed ratio.

3, high rigidity

Increase the mesh rate to disperse the load, so the rigidity is high.

4. High overload capacity

It maintains trouble-free operation under abnormally low noise and vibration conditions while ensuring excellent overturning and torsional stiffness parameters. Integrated axial radial cross roller bearings, high load capacity and overload capacity of the reducer, can ensure users to provide a variety of temperature range of applications.

5, the motor installation is simple

Electromechanical integration design, can be directly connected with the motor, any brand of motor can be installed directly, without adding any device.

6. Maintenance free

Seal grease to achieve maintenance free. No refueling, no mounting direction restrictions.

7, stable performance

The manufacturing process of high wear-resistant materials and high precision parts has been certified by ISO9000 quality system, which guarantees the reliable operation of the reducer.

Product Classification

WF Series
High Precision Miniature Reducer

WF series is a high precision micro cycloidal reducer with flange, which has a wide range of applications. This series of reducers includes precise reduction mechanisms and radial – axial roller bearings. The unique design allows load to act directly on the output flange or housing without additional bearings. WF series reducer is characterized by module design, can be installed through the flange motor and reducer, belongs to the motor directly connected reducer.

WFH Series
High Precision Miniature Reducer

WFH series is a hollow form of high precision miniature cycloidal reducer, wire, compressed air pipeline, drive shaft can be through the hollow shaft, non-motor direct connection type reducer. The WFH series is fully sealed, full of grease and includes precise deceleration mechanism and radial – axial roller bearings. The unique design allows load to be acted directly on the output flange or housing without additional bearings.

WR Series
high-precision corner reducer

The WR series is a flange output corner reducer. Like the WF and WFH series, it is a high-precision reducer (backlash less than 1 arc.min), and the level 2 can also be within 1 arc.min, which is higher than other types. Corner type reducer. It can replace the harmonic drive reducer, and its life and rigidity are more than 3 times that of the harmonic.

Product Parameters

Size	reduction ratio		Rated output moment	Allowable torque of start and stop	Instantaneous allowable moment	Rated input speed	Maximum input speed	Tilt stiffness	Torsional stiffness	No-load starting torque	Transmission accuracy	Error accuracy	Moment of inertia	Weight
	Axis rotation	Shell rotation	Nm	Nm	Nm	rpm	rpm	Nm/arcmin	Nm/arcmin	Nm	arcmin	arcmin	kg-m²	kg
WF07	21	20	15	30	45	3000	6000	6	1.1	0.12	P1≤±1 P2≤±3	P1≤±1 P2≤±3	0.52	0.42
	41	40								0.11			0.47
WF17	21	20	50	100	150	3000	6000	28	6	0.21	P1≤±1 P2≤±3	P1≤±1 P2≤±3	0.88	0.85
	41	40								0.18			0.72
	61	60								0.14			0.69
WF25	21	20	110	220	330	3000	5500	131	24	0.47	P1≤±1 P2≤±3	P1≤±1 P2≤±3	6.12	2
	31	30								0.41			5.67
	41	40								0.38			4.9
	51	50								0.35			4.56
	81	80								0.31			4.25
WF32	25	24	190	380	570	3000	4500	240	35	1.15	P1≤±1 P2≤±3	P1≤±1 P2≤±3	11	4.2
	31	30								1.1			10.8
	51	50								0.77			9.35
	81	80								0.74			8.32
	101	100								0.6			7.7
WF40	25	24	320	640	960	3000	4000	377	50	1.35	P1≤±1 P2≤±3	P1≤±1 P2≤±3	13.2	6.6
	31	30								1.32			12.96
	51	50								0.92			11.22
	81	80								0.81			9.84
	121	120								0.72			8.4

Installation Instructions

Company Profile

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Shipping Cost: Estimated freight per unit.	To be negotiated

Application:	Motor, Machinery, Agricultural Machinery
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type

Customization:	Available \| Customized Request

helical gearbox

How to Use a Cyclone Gearbox

Often, a cycloidal gearbox is used in order to achieve a torque transfer from a motor or pump. This type of gearbox is often a common choice as it has a number of advantages over a regular gearbox. Its main advantage is that it is easy to make, which means that it can be incorporated into a variety of applications. However, if you want to use a cycloidal gearbox, there are a few things that you need to know. These include the operation principle, the structure and the dynamic and inertial effects that come with it.

Dynamic and inertial effects

Several studies have been carried out on the static and dynamic properties of cycloidal gears. The study of these effects is beneficial in assisting optimal design of cycloidal speed reducers.
In this paper, the dynamic and inertial effects of a two-stage cycloidal speed reducer have been investigated using the CZPT program package. Moreover, a new model for cycloidal reducers based on non-linear contact dynamics has been developed. The new model aims to predict several operational conditions.
The normal excitation contact force for the cycloid discs of the first and second stage is very similar. However, the total deformation at the contact point is different. This effect is mainly due to the system’s own oscillations. The cycloid discs of the second stage turn around the ring gear roller with a 180deg angle. This angle is a significant contributor to the torque loads. The total excitation force on the cycloid discs of first and second stage is 1848 N and 2068.7 N, respectively.
In order to analyze the contact stress, different gear profiles were investigated. The mesh density was considered as an important design criterion. It was found that a bigger hole reduces the material content of the cycloidal disc and results in more stresses.
Moreover, it is possible to reduce the contact forces in a more efficient manner by changing the geometric parameters. This can be done by mesh refinement along the disc width. The cycloidal disc has the greatest influence on the output results.
The efficiency of a cycloidal drive increases with the increase in load. The efficiency of a cycloidal reducer also depends on the eccentricity of the input shaft and the cycloidal plate. The efficiency curve for small loads is linear. However, for the larger loads, the efficiency curve becomes more non-linear. This is because the stiffness of the cycloid reducer increases as the load increases.

Structure

Despite the fact that it looks like a complicated engineering puzzle, the construction of a cycloidal gearbox is actually quite simple. The key elements are the base, the load plate and the thrust bearing. All these elements work together to create a stable, compact gearbox.
The base is a circular section with several cylindrical pins around its outer edge. The pins are fixed on a fixed ring that holds them in a circular path. The ring serves as a reference circle. The circle’s size is approximately 5mm in diameter.
The load plate is a series of threaded screw holes. These are arranged 15mm away from the center. These are used to anchor external structures. The load plate must be rotated around the X and Y axis.
The thrust bearing is placed on top of the load plate. The bearing is made of an internal diameter of 35mm and an external diameter of 52mm. It is used to allow rotation around the Z axis.
The cycloidal disc is the centerpiece of the cycloidal gearbox. The disc has holes for the pins that drive the output shaft. The holes are larger than those used in output roller pins. The disc also has a reduced eccentricity.
The pins are attached to the cycloidal disc by rolling pins. The pins are made of a material that provides mechanical support for the drive during high-torque situations. The pins have a 9mm external diameter. The disc has a number of lobes and is rotated by one lobe per shaft revolution.
The cycloidal gearbox also has a top cover that helps keep the components together. The cover has a pocket for tools. The top cover also has threads that screw into the casing. helical gearbox

Operation principle

Among many types of gear transmissions, cycloidal gearboxes are used in heavy machinery and multi-axis robots. They are highly effective, compact and capable of high ratios. In addition, they have an overload capability.
Cycloid disks are driven by eccentric shafts that rotate around fixed ring pins. Roller pins of the pin disc engage with holes in the cycloidal disc. These roller pins drive the pin disc and the pin disc transfers the motion to the output shaft.
Unlike conventional gear drives, cycloidal drives have low backlash and high torsional stiffness. They are ideally suited to heavy loads and all drive technologies. The lower mass and compact design of the cycloidal disk also contributes to its high efficiency and positioning accuracy.
The cycloidal disc plays a central role in the gearbox kinematics. It rotates around a fixed ring in a circle. When the disc is pushed against the ring gear, the pins engage with the disc and the roller pins rotate around the pins. This rotating motion generates vibration, which travels through the driven shafts.
Cycloid discs are typically designed with a short cycloid, so that the eccentricity is minimized. This reduces unbalance forces at high speeds. Ideally, the number of lobes on the cycloid is smaller than the number of surrounding pins. This reduces the amount of Hertzian contact stress.
Unlike planetary gears, cycloidal gears have high accuracy and are capable of withstanding shock loads. They also experience low friction and less wear on tooth flanks. They also have higher efficiency and load capacity.
Cycloid gears are generally more difficult to manufacture than involute gears. Cycloid gears are not suitable for stacking gear stages. They require extreme accuracy for manufacturing. However, their smaller size and low backlash, high torsional stiffness, and low vibration make them ideal for use in heavy machines.

Involute gear tooth profile

Almost all gears are manufactured with an involute gear tooth profile. Cycloid gears are also produced with this profile. Compared with involute gears, cycloid gears are stronger and can transmit more power. However, they can also be more difficult to manufacture. This makes them costlier.
The involute gear tooth profile is a smooth curve. It is derived from the involute curve of a circle. A tangent to the base circle is the normal at any point of an involute.
This curve has properties that allow the involute gear teeth to transfer motion in perpendicular direction. It is also the path traced by the end of the string unwrapping from a cylinder.
An involute profile has the advantage of being easy to manufacture. It also allows for smooth meshing despite misalignment of the centre distance. This profile is also preferred over a cycloid tooth profile, but it is not the best in every regard.
Cycloid gear teeth are also made of two curves. Unlike involute teeth, cycloid gear teeth have a consistent radius. Cycloid gears are less likely to produce noise. But they are also more expensive to manufacture.
Involute teeth are easier to manufacture because they have only one curve. Cycloid gears can also be made with a rack type cutter. This makes them cheaper to manufacture. However, they require an expert design. They can also be manufactured with a gear shaper that includes a pinion cutter.
The tooth profiles that satisfy the law of gear-tooth action are sometimes called conjugate profiles. The involute profile is the most common of these. It allows for constant torque transmission. helical gearbox

Backlash

Typically, cycloidal drives provide a high ratio of transmission with no backlash. This is because the cycloid disc is driven by an eccentric shaft. During rotation, the cycloid disc rotates around a fixed ring. This ring also rotates independently of the center of gravity.
The cycloid disc is typically shortened to reduce the eccentricity. This helps to minimize the unbalance forces that may occur at high speeds. The cycloid also offers a larger gear ratio than traditional gears. This provides a better positional accuracy.
Cycloid drives also have a high torsional stiffness. This provides greater torsional resilience and shock load capabilities. This is important for a number of reasons, such as in heavy-duty applications.
Cycloid drives also have lower mass. These benefits make them ideally suited for all drive technologies. The design also allows for higher torsional stiffness and service life. These drives also have a much smaller profile.
Cycloid drives are also used to reduce speed. Because of the high torsional stiffness of the cycloid, they also have high positioning accuracy.
Cycloid drives are well-suited to a variety of applications, including electric motors, generators, and pump motors. They are also highly resistant to shock loads, which is important in a variety of applications. This design is ideal for applications that require a large transmission ratio in a compact design.
Cycloid drives also have the advantage of minimizing the clearance between the mating components. This helps to eliminate interference and ensure a positive fit. This is particularly important in gearboxes. It also allows for the use of a load cell and potentiometer to determine the backlash of the gearbox.
China Professional China Factory Customization High Payload Motor Reducer Agriculture 2 Speed Gearbox wholesaler
editor by CX 2023-05-30

China Custom Trc Helical Gear Motor Reducer Gearbox with Stable Speed Transmission cycloidal gearbox ratio

Product Description

Features for SRC helical gearboxes reducers,

1.Larger output torque,stable transmission with lower noise,

2.Ommibearing installation available,

3.Aluminium alloy diecast,

4.Customising available for flange or shaft

Important information for SRC helical gear speed reducers,

Input coupling	Flange and shaft
Output coupling	Flange and shaft
Foot mounted	Available for Motovario and CZPT foot mounted specs. The letter,B in the data sheet of foot code is for CZPT and M for Motovario
Range of reduction ratios	3.74—51.30
Motor power coupled	0.12—4KW
Version	1.Flange coupled,shaft output,with foot mounted,marked as SRC…P 2.Shaft coupled and output,with foot mounted,marked as SRC…HS 3.Flange coupled,shaft output,no foot mounted,marked as SRCZ…P 4.Shaft coupled and output,no foot mounted,marked as SRCZ…HS 5.Flange coupled and output,no foot mounted,marked as SRCF…P 6.Shaft coupled,flange output,no foot mounted,marked as SRCF…HS

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

Shipping Cost:

Estimated freight per unit.

To be negotiated|

Freight Cost Calculator

Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type

Samples:	US$ 90/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

The Basics of Designing a Cyclone Gearbox

Compared to conventional gearboxes, the cycloidal gearbox offers a number of advantages including a higher ratio of transmission, robustness against shock loads, and greater positioning accuracy. However, designing a cycloidal gearbox can be complicated. This article will discuss some of the basic design principles. In addition, it will cover topics such as size, position accuracy, and transmission ratios. helical gearbox

Basic design principles

Unlike a conventional ring gear, a cycloidal gearbox uses a cycloidal disc to provide torque multiplication. The output direction of the cycloidal gear disc is opposite to the rotation of the input shaft. This allows for more compact gear construction. It also allows for increased load capacity.
Cycloid drive kinematics can appear complex, but they are actually quite simple. Instead of rotating around the center of gravity like conventional gears, the cycloidal disc rotates around fixed pins. This provides a higher reduction ratio.
To reduce vibrations and noise, multiple cycloidal discs are used. This allows for uniform distribution of forces on the carrier pin devices. This also provides a better rotational balance. In addition, multiple cycloidal discs reduce the axial moment of the carrier pin devices.
The cycloidal gear disc is supported by a separate gear disc bearing. This design provides a low component count and reduces wear. This type of kinematics can also be used in an electric motor with a high power density.
The cycloidal gear disc provides a high reduction ratio, which allows for compact construction. Unlike a ring gear, the cycloidal disc has fewer teeth. It also provides a higher reduction ratio, which is advantageous for high rotational input speed applications.
Cycloid gear discs have cylindrical holes, which allow for carrier pin devices to protrude through them. This is useful because the carrier pin devices can roll along the inside wall of the cylindrical hole in the gear disc.
A load plate is also used to provide anchorage for external structures. This plate contains threaded screw holes arranged 15mm away from the center. It has a 9mm external diameter and a 3mm through hole.

Transmission ratios up to 300:1

cycloidal gearboxes are used in a wide range of applications, from machine tools to medical imaging devices. Compared to planetary gearboxes, they offer superior positioning accuracy, torsional stiffness, backlash, and fatigue performance.
Cycloid gearboxes are also capable of transmitting more torque than planetary gears. In addition, they have a lower Hertzian contact stress and higher overload protection. Cycloid gearboxes are able to provide transmission ratios up to 300:1 in a small package.
Cycloid gears also have lower backlash over extended periods, making them an ideal choice for applications with critical positioning accuracy. Cycloid gearboxes also have good wear resistance, as well as low friction. Cycloid gears are lightweight and have good torsional stiffness, making them ideal for applications with heavy loads.
Cycloid gearboxes have several different designs. They can provide transmission ratios up to 300:1 without the need for additional pre-stages. Cycloid gears also require more accurate manufacturing processes than involute gears. Cycloid gearboxes can also be used for applications that require high power consumption, and can withstand shock loads.
Cycloid gearboxes can be adapted to fit most common servomotors. They have a modular design, all-round corrosion protection, and easy installation. Cycloid gears have a radial clamping ring, which reduces inertia by up to 39%.
CZPT Precision Europe GmbH, a subsidiary of CZPT Group, has developed an innovative online configurator to simplify the configuration of gearboxes. CZPT cycloidal gearheads are precision-built, robust, and reliable. They have a two-stage reduction principle, which minimises vibration and provides even force distribution.
Cycloid gears are capable of providing transmission ratios from 30:1 to 300:1. Cycloid gearboxes can achieve high gear ratios because they require fewer moving parts, and they have a low backlash. helical gearbox

Robustness against shock loads

Unlike conventional gearboxes that are easily damaged by shock loads, the cycloidal gearbox is extremely robust. It is a versatile solution that is ideally suited for handling equipment, food manufacturing, and machine tools.
The mechanical construction of a cycloidal gearbox consists of several mechanical components. These include cycloidal wheels, bearings, transformation elements, and needles. In addition, it has high torsional stiffness and tilting moment. It is also accompanied by highly nonlinear friction characteristic.
In order to assess the robustness of the cycloidal gearbox against shock loads, a mathematical model was developed. The model was used to calculate the stress distribution on the cycloid disc. This model can be used as a basis for more complex mechanical models.
The model is based on new approach, which allows to model stiction in all quadrants of the cycloid gear. In addition, it can be applied to actuator control.
The mathematical model is presented together with the procedure for measuring the contact stress. The results are compared to the measurement performed in the real system. The model and the measurement are found to be very close to each other.
The model also allows for the analysis of different gear profiles for load distribution. In addition, it is possible to analyze contact stresses with different geometric parameters. The mesh refinement along the disc width helps to ensure an even distribution of contact forces.
The stiction breakaway speed is calculated to the motor side. The non-zero current is then derived to the input side of the gearbox. In addition, a small steady phase is modeled during the speed direction transition. The results of the simulation are compared to the measurement. The results show that the model is extremely accurate.

Positioning accuracy

Getting the correct positioning accuracy from a cycloidal gearbox is no small feat. This is because the gears are compact, and the clearances are relatively small. This means you can expect a lot of torque from your output shaft. However, this is only part of the picture. Other concerns, such as backlash, kinematic error, and loading are all important considerations.
Getting the best possible positioning accuracy from a cycloidal gearbox means choosing a reducer that is well-made and correctly configured. A properly-selected reducer will eliminate repeatable inaccuracies and provide absolute positioning accuracy at all times. In addition, this type of gearbox offers several advantages over conventional gearboxes. These include high efficiency, low backlash, and high overload protection.
Getting the correct positioning accuracy from a gearbox also involves choosing a supplier that knows what it is doing. The best vendors are those who have experience with the product, offer a wide variety, and provide support and service to ensure the product is installed and maintained correctly. Another consideration is the manufacturer’s warranty. A reputable manufacturer will offer warranties for the gearbox. The aforementioned factors will ensure that your investment in a cycloidal gearbox pays off for years to come.
Getting the correct positioning accuracy from your cycloidal gearbox involves choosing a manufacturer that specializes in this type of product. This is particularly true if you are involved in robotics, automated painting, or any other industrial process that requires the best possible accuracy. A good manufacturer will offer the latest technology, and have the expertise to help you find the best solution for your application. This will ensure your product is a success from start to finish. helical gearbox

Size

Choosing the right size of cycloidal gearbox is important for its efficient operation. However, it is not a simple task. The process involves complex machining and requires the creation of many parts. There are different sizes of cycloidal gearboxes, and a few basic rules of thumb can help you choose the right size.
The first rule of thumb for choosing the right size of cycloidal gearboxes is to use a gearbox with the same diameter of the input shaft. This means that the gearbox must be at least 5mm thick. The cycloid will also require a base and a bearing to hold the driveshaft in place. The base should be large enough to house the pins. The bearing must be the same size as the input shaft.
The next rule of thumb is to have a hole in the cycloid for the output shaft. In this way, the output will be back-drivable and has low backlash. There should be at least four to six output holes. The size of the holes should be such that the centerline of the cycloid is equal to the size of the center of the bearing.
Using a Desmos graph, you can then create the gear parameters. The number of pins should be equal to the number of teeth in the cycloidal gear, and the size of the pins should be twice the size of the gear. The radius of the pins should be equal to the value of C from Desmos, and the size of the pin circle should be equal to the R value.
The final rule of thumb is to ensure that the cycloid has no sharp edges or discontinuities. It should also have a smooth line.
China Custom Trc Helical Gear Motor Reducer Gearbox with Stable Speed Transmission cycloidal gearbox ratio
editor by CX

Application:	Motor
Layout:	Cycloidal
Installation:	Vertical Type
Step:	Double-Step
Size:	32, 42, 52, 62,72mm
Manipulate Way:	Forced Manipulation

Customization:	Available \|

Application:	Motor
Layout:	Cycloidal
Installation:	Vertical Type
Step:	Double-Step
Size:	32, 42, 52, 62,72mm
Manipulate Way:	Forced Manipulation

Customization:	Available \|

Solution Description

Product Description:

1. Flexspline is a hollow flanging common cylinder structure.

two. There is a massive-diameter hollow shaft gap in the middle of the cam of the wave generator. The inner style of the reducer has a assistance bearing.

3. It has a totally sealed construction and is easy to put in. It is very suited for instances the place the wire needs to be threaded from the center of the reducer.

Advantages:
1. Higher precision,substantial torque
two. Dedicated technological staff can be on-the-go to supply design and style options
three. Manufacturing facility direct income good workmanship resilient high quality assurance
4. Solution good quality concerns have a one-year warranty time, can be returned for replacement or fix

Organization profile:

HangZhou CZPT Technologies Co., Ltd. recognized in 2014, is fully commited to the R & D plant of substantial-precision transmission components. At current, the annual creation capacity can get to 45000 sets of harmonic reducers. We firmly think in good quality very first. All hyperlinks from uncooked materials to completed merchandise are strictly supervised and controlled, which supplies a reliable basis for merchandise quality. Our goods are marketed all more than the country and abroad.

The harmonic reducer and other high-precision transmission parts have been independently designed by the business. Our company spends 20% of its revenue every single yr on the research and improvement of new technologies in the sector. There are 5 individuals in R & D.

Our gain is as below:

one.7 years of marketing encounter

2. 5-individual R & D group to supply you with specialized support

three. It is bought at residence and abroad and exported to Turkey and Eire

four. The solution top quality is certain with a one particular-12 months guarantee

5. Merchandise can be customized

Energy factory:

Our plant has an total campus The variety of workshops is about three hundred Whether it’s from the creation of raw components and the procurement of uncooked supplies to the inspection of concluded products, we are doing it ourselves. There is a full generation system

HST-III Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at start off end		The allowable highest of the typical load torque		Maximum torque is permitted in an immediate		Allow the greatest pace to be entered	Regular input velocity is authorized	Back hole	layout life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	six.2	.six	twenty.seven	2.one	7.9	.7	forty.3	4.1	7000	3000	≤30	10000
	80	9	.nine	27	two.seven	12.7	1.three	54.1	5.five
	100	9	.nine	32	3.three	12.seven	1.three	sixty two.one	six.three
17	50	eighteen.4	1.nine	39	four	29.nine	three	eighty.5	eight.2	6500	3000	≤30	15000
	80	25.3	2.six	49.five	5	31	3.two	100.1	ten.two
	one hundred	27.six	two.8	62	six.three	forty five	4.six	124.two	12.seven
20	fifty	28.eight	2.9	sixty four.4	6.six	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	four	85	eight.8	54	5.five	146.1	fourteen.9
	100	46	four.seven	94.three	nine.six	fifty six	5.8	169.one	seventeen.two
	120	forty six	4.7	100	10.2	56	five.8	169.1	17.2
	160	46	four.seven	one hundred	10.2	fifty six	5.eight	169.1	17.two
25	50	forty four.9	four.6	113	eleven.five	sixty three	6.5	213.9	21.eight	4800	3000	≤30	15000
	eighty	seventy two.five	seven.4	158	16.1	a hundred	ten.2	293.3	29.9
	100	77.1	7.9	181	18.four	124	12.seven	326.6	33.three
	one hundred twenty	77.one	7.nine	192	19.six	124	12.7	349.six	35.6
32	fifty	87.4	8.nine	248	25.3	124	twelve.seven	439	forty four.eight	4000	3000	≤30	15000
	eighty	one hundred thirty five.seven	thirteen.eight	350	35.six	192	19.6	653	sixty six.six
	one hundred	157.6	sixteen.1	383	39.one	248	twenty five.3	744	seventy five.9
40	100	308	37.2	660	sixty seven	432	44	1232	126.seven	4000	3000	≤30	15000

HSG Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at commence end		The allowable greatest of the average load torque		Maximum torque is allowed in an instantaneous		Allow the greatest speed to be entered	Average input pace is permitted	Back again hole	design and style daily life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	seven	.seven	23	2.3	nine	.9	46	4.7	14000	8500	≤20	15000
	80	10	1	thirty	3.one	fourteen	one.4	sixty one	six.two
	one hundred	10	one	36	three.7	14	one.four	70	seven.two
17	50	21	two.1	forty four	four.five	34	three.4	91	9	10000	7300	≤20	20000
	80	29	two.9	fifty six	5.7	35	three.six	113	12
	100	31	three.2	70	seven.two	51	5.2	143	15
20	50	33	three.three	seventy three	7.four	44	4.five	127	thirteen	10000	6500	≤20	20000
	eighty	forty four	four.five	96	nine.8	sixty one	six.two	165	seventeen
	one hundred	52	5.three	107	ten.9	64	six.5	191	twenty
	a hundred and twenty	52	5.three	113	eleven.five	sixty four	six.five	191	20
	160	52	5.3	120	12.2	64	6.five	191	20
25	50	51	five.2	127	thirteen	seventy two	7.3	242	twenty five	7500	5600	≤20	20000
	80	eighty two	eight.4	178	18	113	twelve	332	34
	a hundred	87	eight.nine	204	21	a hundred and forty	fourteen	369	38
	one hundred twenty	87	8.nine	217	22	140	14	395	40
32	50	99	10	281	29	one hundred forty	fourteen	497	fifty one	7000	4800	≤20	20000
	eighty	153	sixteen	395	40	217	22	738	75
	100	178	18	433	forty four	281	29	841	86
forty	100	345	35	738	seventy five	484	49	1400	143	5600	4000	≤20	20000

Exhibitions:
Software case:

FQA:
Q: What must I provide when I pick a gearbox/speed reducer?
A: The ideal way is to offer the motor drawing with parameters. Our engineer will examine and suggest the most suited gearbox product for your reference.
Or you can also give the under specification as nicely:
1) Sort, design, and torque.
2) Ratio or output speed
three) Functioning issue and link method
four) Quality and mounted device name
five) Enter mode and input speed
6) Motor brand name model or flange and motor shaft dimension

US $290-500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery, Hst-I
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	0.6	20.7	2.1	7.9	0.7	40.3	4.1	7000	3000	≤30	10000
	80	9	0.9	27	2.7	12.7	1.3	54.1	5.5
	100	9	0.9	32	3.3	12.7	1.3	62.1	6.3
17	50	18.4	1.9	39	4	29.9	3	80.5	8.2	6500	3000	≤30	15000
	80	25.3	2.6	49.5	5	31	3.2	100.1	10.2
	100	27.6	2.8	62	6.3	45	4.6	124.2	12.7
20	50	28.8	2.9	64.4	6.6	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.8	54	5.5	146.1	14.9
	100	46	4.7	94.3	9.6	56	5.8	169.1	17.2
	120	46	4.7	100	10.2	56	5.8	169.1	17.2
	160	46	4.7	100	10.2	56	5.8	169.1	17.2
25	50	44.9	4.6	113	11.5	63	6.5	213.9	21.8	4800	3000	≤30	15000
	80	72.5	7.4	158	16.1	100	10.2	293.3	29.9
	100	77.1	7.9	181	18.4	124	12.7	326.6	33.3
	120	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	135.7	13.8	350	35.6	192	19.6	653	66.6
	100	157.6	16.1	383	39.1	248	25.3	744	75.9
40	100	308	37.2	660	67	432	44	1232	126.7	4000	3000	≤30	15000

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	0.7	23	2.3	9	0.9	46	4.7	14000	8500	≤20	15000
	80	10	1	30	3.1	14	1.4	61	6.2
	100	10	1	36	3.7	14	1.4	70	7.2
17	50	21	2.1	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.6	113	12
	100	31	3.2	70	7.2	51	5.2	143	15
20	50	33	3.3	73	7.4	44	4.5	127	13	10000	6500	≤20	20000
	80	44	4.5	96	9.8	61	6.2	165	17
	100	52	5.3	107	10.9	64	6.5	191	20
	120	52	5.3	113	11.5	64	6.5	191	20
	160	52	5.3	120	12.2	64	6.5	191	20
25	50	51	5.2	127	13	72	7.3	242	25	7500	5600	≤20	20000
	80	82	8.4	178	18	113	12	332	34
	100	87	8.9	204	21	140	14	369	38
	120	87	8.9	217	22	140	14	395	40
32	50	99	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	75
	100	178	18	433	44	281	29	841	86
40	100	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

US $290-500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery, Hst-I
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	0.6	20.7	2.1	7.9	0.7	40.3	4.1	7000	3000	≤30	10000
	80	9	0.9	27	2.7	12.7	1.3	54.1	5.5
	100	9	0.9	32	3.3	12.7	1.3	62.1	6.3
17	50	18.4	1.9	39	4	29.9	3	80.5	8.2	6500	3000	≤30	15000
	80	25.3	2.6	49.5	5	31	3.2	100.1	10.2
	100	27.6	2.8	62	6.3	45	4.6	124.2	12.7
20	50	28.8	2.9	64.4	6.6	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.8	54	5.5	146.1	14.9
	100	46	4.7	94.3	9.6	56	5.8	169.1	17.2
	120	46	4.7	100	10.2	56	5.8	169.1	17.2
	160	46	4.7	100	10.2	56	5.8	169.1	17.2
25	50	44.9	4.6	113	11.5	63	6.5	213.9	21.8	4800	3000	≤30	15000
	80	72.5	7.4	158	16.1	100	10.2	293.3	29.9
	100	77.1	7.9	181	18.4	124	12.7	326.6	33.3
	120	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	135.7	13.8	350	35.6	192	19.6	653	66.6
	100	157.6	16.1	383	39.1	248	25.3	744	75.9
40	100	308	37.2	660	67	432	44	1232	126.7	4000	3000	≤30	15000

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	0.7	23	2.3	9	0.9	46	4.7	14000	8500	≤20	15000
	80	10	1	30	3.1	14	1.4	61	6.2
	100	10	1	36	3.7	14	1.4	70	7.2
17	50	21	2.1	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.6	113	12
	100	31	3.2	70	7.2	51	5.2	143	15
20	50	33	3.3	73	7.4	44	4.5	127	13	10000	6500	≤20	20000
	80	44	4.5	96	9.8	61	6.2	165	17
	100	52	5.3	107	10.9	64	6.5	191	20
	120	52	5.3	113	11.5	64	6.5	191	20
	160	52	5.3	120	12.2	64	6.5	191	20
25	50	51	5.2	127	13	72	7.3	242	25	7500	5600	≤20	20000
	80	82	8.4	178	18	113	12	332	34
	100	87	8.9	204	21	140	14	369	38
	120	87	8.9	217	22	140	14	395	40
32	50	99	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	75
	100	178	18	433	44	281	29	841	86
40	100	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

The Basics of a Cyclone Gearbox

Besides being compact, cycloidal speed reducers also offer low backlash and high ratios. Because of the small size of the drive, they are ideal for applications where space is a problem. helical gearbox

Involute gear tooth profile

Almost all gears use an involute gear tooth profile. This profile has a single curve, which means that the gear teeth do not have to be aligned closely with each other. This profile is smooth and can be manufactured easily.
Cycloid gears have a combination of epicycloid and hypocycloid curves. This makes them stronger than involute gear teeth. However, they can be more expensive to manufacture. They also have larger reduction ratios. They transmit more power than involute gears. Cycloid gears can be found in clocks.
When designing a gear, you need to consider several factors. Some of these include the number of teeth, the tooth angle and the lubrication type. Having a gear tooth that is not perfectly aligned can result in transmission error, noise and vibration.
The tooth profile of an involute gear is usually considered the best. Because of this, it is used in a wide variety of gears. Some of the most common applications for this profile are power transmission gears. However, this profile is not the best for every application.
Cycloid gears require more complex manufacturing processes than involute gear teeth. This can cause a larger tooth cost. Cycloid gears are used for less noisy applications.
Cycloid gears also transmit more power than involute gears. This can cause problems if the radii change tangentially. However, the shape is more simple than involute gears. Involute gears can handle centre sifts better.
Cycloid gears are less susceptible to transmission error. Cycloid gears have a convex surface, which makes them stronger than involute teeth. Cycloid gears also have a larger reduction ratio than involute gears. Cycloid teeth do not interfere with the mating teeth. However, they have a smaller number of teeth than involute teeth.

Rotation on the inside of the reference pitch circle of the pins

Whether a cycloidal gearbox is designed for stationary or rotating applications, the fundamental law of gearing must be observed: The ratio of angular velocities must be constant. This requires the rotation on the inside of the reference pitch circle of the pins to be constant. This is achieved through a series of cycloidal teeth, which act like tiny levers to transmit motion.
A cycloidal disc has N lobes which are rotated by three lobes per rotation around N pins. The number of lobes on a cycloidal disc is a significant factor in determining the transmission ratio.
A cycloidal disc is driven by an eccentric input shaft which is mounted to an eccentric bearing within an output shaft. As the input shaft rotates, the cycloidal disc moves around the pins of the pin disc.
The drive pin rotates at a 40 deg angle while the cycloidal disc rotates on the inside of the reference pitch circle of pins. As the drive pin rotates, it will slow the output motion. This means that the output shaft will complete only three revolutions with the input shaft, as opposed to nine revolutions with the input shaft.
The number of teeth on a cycloidal disc must be small compared to the number of surrounding pins. The disc must also be constructed with an eccentric radius. This will determine the size of the hole which will be required for the pin to fit between the pins.
When the input shaft is turned, the cycloidal disc will rotate on the inside of the reference pitch circle of roller pins. This will then transmit motion to the output shaft. The output shaft is supported by two bearings in an output housing. This design has low wear and torsional stiffness. helical gearbox

Transmission ratio

Choosing the right transmission ratio of cycloidal gearbox isn’t always easy. You might need to know the size of your gearbox before you can make an educated choice. You may also need to refer to the product catalog for guidance. For example, CZPT gearboxes have some unique ratios.
A cycloidal gear reducer is a compact and high-speed torque transmission device that reverses the direction of angular movement of the follower shaft. It consists of an eccentric cam positioned inside a cycloidal disc. Pin rollers on the follower shaft fit into matching holes in the cycloidal disc. In the process, the pins slide around the holes, in response to wobbling motion. The cycloidal disc is also capable of engaging the internal teeth of a ring-gear housing.
A cycloidal gear reducer can be used in a wide variety of applications, including industrial automation, robotics and power transmissions on boats and cranes. A cycloidal gear reducer is ideally suited for heavy duty applications with large payloads. They require specialized manufacturing processes, and are often used in equipment with precise output and high efficiency.
The cycloidal gear reducer is a relatively simple structure, but it does require some special tools. Cycloid gear reducers are also used to transmit torque, which is one of the reasons they are so popular in automation. Using a cycloidal gear reducer is a good choice for applications that require higher efficiency and lower backlash. It is also a good choice for applications where size is a concern. Cycloid gears are also a good choice for applications where high speed and high torque are required.
The transmission ratio of cycloidal gearbox is probably the most important function of a gearbox. You need to know the size of your gearbox and the type of gears it contains in order to make the right choice.

Vibration reduction

Considering the unique dynamics of a cycloidal gearbox, vibration reduction measures are required for a smooth operation. These measures can also help with the detection of faults.
A cycloidal gearbox is a gearbox with an eccentric bearing that rotates the center of the gears. It shares torque load with five outer rollers at any given time. It can be applied in many applications. It is a relatively inexpensive asset. However, if it fails, it can have significant economic impacts.
A typical input/output gearbox consists of a ring plate and two cranks mounted on the input shaft. The ring plate rotates when the input shaft rotates. There are two bearings on the output shaft.
The ring plate is a major noise source because it is not balanced. The cycloidal gear also produces noise when it meshes with the ring plate. This noise is generated by structural resonance. Several studies have been performed to solve this problem.
However, there is not much documented work on the condition monitoring of cycloidal gearboxes. In this article, we will introduce modern techniques for vibration diagnostics.
A cycloidal gearbox with a reduced reduction ratio has higher induced stresses in the cycloidal disc. In this case, the size of the output hole is larger and more material is removed from the cycloidal disc. This increase in the disc’s stresses leads to higher vibration amplitudes.
The load distribution along the width of the gear is an important design criterion. Using different gear profiles can help to optimize the transmission of torque. The contact stress of the cycloidal disc can also be investigated.
To determine the amplitude of the noise, the frequency of the gear mesh is multiplied by the shaft rate. If the RPM is relatively stable, the frequency can be used as a measure of magnitude. However, this is only accurate at close to failure. helical gearbox

Comparison with planetary gearboxes

Several differences exist between cycloidal gearboxes and planetary gearboxes. They are related to gear geometry and manufacturing processes. Among them, there are:
– The output shaft of a cycloidal gearbox has a larger torque than the input shaft. The rotational speed of the output shaft is lower than the input shaft.
– The cycloid gear disc rotates at variable velocity, while the planetary gear has a fixed speed. Consequently, the cycloid disc and output flange transmission accuracy is lower than that of the planetary gears.
– The cycloidal gearbox has a larger gripping area than the planetary gear. This is an advantage of the cycloidal gearbox in that it can handle larger loads.
– The cycloid profile has a significant impact on the quality of contact meshing between the tooth surfaces. The width of the contact ellipses increases by 90%. This is a result of the elimination of undercuts of the lobes. In this way, the contact force on the cycloid disc is decreased significantly.
– The cycloid drive has lower backlash and high torsional stiffness. This allows a cycloidal drive to be more stable against shock loads. The cycloid drive is also a compact design, which is ideally suited for applications with large transmission ratios.
– The output hub of the cycloid gearbox has movable pins and rollers. These components are attached to the ring gear in the outer gearbox. The output shaft is also turned by the planet carrier. The output hub of the cycloid system is composed of two parts: the ring gear and the output flange.
– The input shaft of a cycloidal gearbox is connected to a servomotor. The input shaft is a cylindrical element that is fixed to the planet carrier.
China Mini Electric Motor Cycloidal Helical Harmonic Gear Speed Reducer Transmission Gearbox cycloidal drive gearbox
editor by czh 2023-01-14

Driven devices
Squander water remedy	Thickeners,filter presses,flocculation apparata,aerators,raking gear,mixed longitudinal and rotary rakes,pre-thickeners,screw pumps,drinking water turbines,centrifugal pumps	Dredgers	Bucket conveyors, dumping gadgets, carterpillar travelling gears, bucket wheel excavators as decide up, bucket wheel excavator for primitive material, cutter head, Custom 38 3mm 8mm Metal Aluminum Break up Set Screw Clamp Lock Threaded Shaft Collar traversing gears
Chemical market	Plate bending machines, extruders, dough mills, rubbers calenders, cooling drums, mixers for uniform media, agitators for media with uniform density, toasters, centrifuges	Steel doing work mills	plate tilters, ingot pushers, winding devices, cooling bed transfer frames, roller straigheners, desk continuous intermittent, roller tables reversing tube mills, shears continuous, casting motorists, reversing CZPT mills
Metal doing work mills	Reversing slabbing mills. reversing wire mills, reversing sheet mills, reversing plate mill, roll adjustment drives	Conveyors	Bucket conveyors, hauling winches, hoists, belt conveyors, very good lifts, passenger lifts, apron conveyors, escalators, rail travlling gears
Frequency converters		Reciprocating compressors
Cranes	Slewing gears, luffing gears, travelling gears, hoisting gear, derricking jib cranes	Cooling towers	Cooling tower enthusiasts, blowers axial and radial
Cane sugar manufacturing	Cane knives, cane mills	Beet sugar production	Beet cossettes macerators, extraction vegetation, mechanical fridges, juice boilers, sugar beet washing devices, sugar beet cutter
Paper devices	Pulper drives	Cableways	Material ropeways, ongoing ropeway
Cement business	Concrete mixer, Pump Bearing Price tag Listing Deep Groove Ball Bearing 6316 breaker, rotary kilns, tube mills, separators, roll crushers

Specification
Type	ZLYJ sequence plastic extruder gearbox
Material	Cast Iron
Color	As your ask for
Model	ZLYJ112/133/146/173/200/225/250/280/315/330/375/420/450/560/630
Input velocity	1500/1200/1000/750/600
Ratio	8/ten/12.5/14/sixteen/18/20
Screw diameter	35/forty five/fifty/fifty five/sixty five/seventy five/90/a hundred/one hundred and five/110/one hundred twenty/a hundred thirty/150/a hundred and sixty/165
Spare part	coller, 8000 collection cycloidal equipment box velocity reducer equipment variator transmission electric worm equipment screw jack value oil pump

Model:	BWD, BXD
Installation:	direct relationship installation, flange installation
Motor:	manufacturing unit geared up motor, Siemens, ABB, and many others.
Ratio	Stage Ratio：9, eleven, seventeen, 23, 29, 35, forty three, HL vehicles bearing 58571 Tapered Roller Bearing 59, seventy one, 87Stage Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Merchandise	Amount of phase	Reduction Ratio	GB042	GB060	GB060A	GB090	GB090A	GB115	GB142	GB180	GB220
Rotary Inertia	1	3	.03	.sixteen		.61		3.twenty five	9.21	28.98	sixty nine.sixty one
		four	.03	.14		.forty eight		two.74	7.54	23.sixty seven	fifty four.37
		5	.03	.13		.forty seven		2.71	seven.42	23.29	53.27
		6	.03	.thirteen		.45		2.sixty five	seven.twenty five	22.seventy five	51.seventy two
		7	.03	.13		.forty five		2.sixty two	7.fourteen	22.forty eight	fifty.ninety seven
		eight	.03	.thirteen		.forty four		2.fifty eight	7.07	22.59	50.eighty four
		nine	.03	.13		.44		two.57	seven.04	22.fifty three	fifty.sixty three
		10	.03	.13		.44		two.57	7.03	22.fifty one	50.fifty six
	2	fifteen	.03	.03	.13	.thirteen	.forty seven	.47	two.seventy one	7.42	23.29
	20	.03	.03	.13	.13	.47	.forty seven	two.71	seven.forty two	23.29
	25	.03	.03	.thirteen	.13	.47	.forty seven	2.seventy one	7.forty two	23.29
	30	.03	.03	.thirteen	.13	.forty seven	.47	2.71	7.forty two	23.29
	35	.03	.03	.13	.thirteen	.47	.47	2.seventy one	7.forty two	23.29
	40	.03	.03	.thirteen	.13	.forty seven	.47	2.seventy one	7.42	23.29
	45	.03	.03	.13	.13	.47	.47	two.71	7.forty two	23.29
	50	.03	.03	.13	.13	.forty four	.forty four	two.fifty seven	7.03	22.fifty one
	sixty	.03	.03	.thirteen	.thirteen	.44	.forty four	2.57	seven.03	22.fifty one
	70	.03	.03	.13	.thirteen	.44	.44	two.57	seven.03	22.fifty one
	eighty	.03	.03	.thirteen	.thirteen	.forty four	.44	2.57	seven.03	22.51
	ninety	.03	.03	.thirteen	.13	.forty four	.44	two.fifty seven	seven.03	22.fifty one
	100	.03	.03	.thirteen	.thirteen	.44	.44	two.57	seven.03	22.fifty one

Item		Variety of stage	GB042	GB060	GB060A	GB90	GB090A	GB115	GB142	GB180	GB220
Backlash(arcmin)	High Precision P0	1				≤1	≤1	≤1	≤1	≤1	≤1
	High Precision P0	two						≤3	≤3	≤3	≤3
	Precision P1	one	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3
	Precision P1	2	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	1	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	two	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7
Torsional Rigidity(N.M/arcmin)		one	three	7	7	14	fourteen	25	fifty	145	225
Torsional Rigidity(N.M/arcmin)		2	three	seven	7	fourteen	fourteen	25	50	145	225
Noise(dB)		one,two	≤56	≤58	≤58	≤60	≤60	≤63	≤65	≤67	≤70
Rated input velocity(rpm)		one,2	5000	5000	5000	4000	4000	4000	3000	3000	2000
Max enter speed(rpm)		one,two	ten thousand	ten thousand	ten thousand	8000	8000	8000	6000	6000	4000

Application:	Machinery, Agricultural Machinery, Automatic Machinery
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Double-Step

Item	Number of stage	Reduction Ratio	GB042	GB060	GB060A	GB090	GB090A	GB115	GB142	GB180	GB220
Rotary Inertia	1	3	0.03	0.16		0.61		3.25	9.21	28.98	69.61
		4	0.03	0.14		0.48		2.74	7.54	23.67	54.37
		5	0.03	0.13		0.47		2.71	7.42	23.29	53.27
		6	0.03	0.13		0.45		2.65	7.25	22.75	51.72
		7	0.03	0.13		0.45		2.62	7.14	22.48	50.97
		8	0.03	0.13		0.44		2.58	7.07	22.59	50.84
		9	0.03	0.13		0.44		2.57	7.04	22.53	50.63
		10	0.03	0.13		0.44		2.57	7.03	22.51	50.56
	2	15	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		20	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		25	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		30	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		35	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		40	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		45	0.03	0.03	0.13	0.13	0.47	0.47	2.71	7.42	23.29
		50	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		60	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		70	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		80	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		90	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51
		100	0.03	0.03	0.13	0.13	0.44	0.44	2.57	7.03	22.51

Item	Variety of phase	Reduction Ratio	GB042	GB060	GB060A	GB090	GB090A	GB115	GB142	GB180	GB220
Rotary Inertia	1	3	.03	.16		.61		three.twenty five	9.21	28.98	sixty nine.61
		four	.03	.14		.48		2.seventy four	7.fifty four	23.67	54.37
		5	.03	.thirteen		.forty seven		two.71	seven.forty two	23.29	53.27
		6	.03	.13		.forty five		two.65	seven.twenty five	22.seventy five	51.72
		seven	.03	.13		.forty five		2.sixty two	7.fourteen	22.forty eight	fifty.ninety seven
		8	.03	.thirteen		.forty four		2.58	seven.07	22.59	50.84
		9	.03	.13		.forty four		two.fifty seven	7.04	22.fifty three	50.63
		10	.03	.thirteen		.44		2.fifty seven	7.03	22.fifty one	fifty.56
	2	fifteen	.03	.03	.thirteen	.thirteen	.forty seven	.47	2.71	7.42	23.29
	20	.03	.03	.thirteen	.13	.47	.47	2.71	7.forty two	23.29
	25	.03	.03	.thirteen	.13	.47	.47	2.71	seven.forty two	23.29
	thirty	.03	.03	.13	.thirteen	.forty seven	.forty seven	2.71	seven.42	23.29
	35	.03	.03	.13	.13	.forty seven	.47	2.71	seven.forty two	23.29
	forty	.03	.03	.thirteen	.13	.forty seven	.47	two.seventy one	7.forty two	23.29
	45	.03	.03	.thirteen	.thirteen	.forty seven	.47	2.71	seven.forty two	23.29
	fifty	.03	.03	.13	.13	.forty four	.forty four	two.fifty seven	7.03	22.51
	60	.03	.03	.13	.13	.forty four	.44	2.fifty seven	7.03	22.fifty one
	70	.03	.03	.13	.thirteen	.forty four	.forty four	2.fifty seven	7.03	22.fifty one
	eighty	.03	.03	.thirteen	.thirteen	.44	.forty four	2.57	seven.03	22.51
	90	.03	.03	.thirteen	.thirteen	.forty four	.44	two.fifty seven	7.03	22.51
	a hundred	.03	.03	.13	.thirteen	.44	.44	two.57	7.03	22.fifty one

Item		Amount of stage	GB042	GB060	GB060A	GB90	GB090A	GB115	GB142	GB180	GB220
Backlash(arcmin)	High Precision P0	1				≤1	≤1	≤1	≤1	≤1	≤1
	High Precision P0	2						≤3	≤3	≤3	≤3
	Precision P1	1	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3	≤3
	Precision P1	2	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	one	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5	≤5
	Standard P2	2	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7	≤7
Torsional Rigidity(N.M/arcmin)		one	three	seven	seven	fourteen	14	twenty five	50	145	225
Torsional Rigidity(N.M/arcmin)		two	three	7	seven	fourteen	14	twenty five	50	a hundred forty five	225
Noise(dB)		one,two	≤56	≤58	≤58	≤60	≤60	≤63	≤65	≤67	≤70
Rated input pace(rpm)		one,2	5000	5000	5000	4000	4000	4000	3000	3000	2000
Max enter pace(rpm)		one,2	ten thousand	ten thousand	ten thousand	8000	8000	8000	6000	6000	4000

Application:	Machinery, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Double-Step

Product Description

How to Use a Cyclone Gearbox

Dynamic and inertial effects

Structure

Operation principle

Involute gear tooth profile

Backlash

Product Description

The Basics of Designing a Cyclone Gearbox

Basic design principles

Transmission ratios up to 300:1

Robustness against shock loads

Positioning accuracy

Size

Item Description

The Basics of a Cyclone Gearbox

Involute gear tooth profile

Rotation on the inside of the reference pitch circle of the pins

Transmission ratio

Vibration reduction

Comparison with planetary gearboxes

How to Select a Gearbox

Function

Purpose

Application

Material

Manufacturing

The Different Types of Gearboxes

Planetary gearbox

Worm reduction gearbox

Shaft-mounted gearbox

1 speed gearbox

Types of Gearboxes Used in Wind Turbines

Coaxial helical gearbox

Worm reduction gearbox

Stainless steel gearbox

1 speed gearbox

The Parts of a Gearbox

Components

Functions

Maintenance

Solution Description

The Basics of a Cyclone Gearbox

Involute gear tooth profile

Rotation on the inside of the reference pitch circle of the pins

Transmission ratio

Vibration reduction

Comparison with planetary gearboxes

Merchandise Description

The Cyclonoidal Gearbox

Dynamic and inertial effects of a cycloidal gearbox

Kinematics of a cycloidal drive

Comparison with planetary gearboxes

Product Description

The Cyclonoidal Gearbox

Dynamic and inertial effects of a cycloidal gearbox

Kinematics of a cycloidal drive

Comparison with planetary gearboxes