Tag Archives: belt

China manufacturer Tkm Kpm Series Right Angle Horizontal Helical Gearbox for Belt Conveyor Transmission cycloidal drive generator

Product Description

1. Technical features

The high degree of modularity is a design feature of SKM, SKB series helical-hypoid gear units. It can be connected respectively with motors such as normal mtor, brake motor, explosion -proof motor, frequency conversion motor, servo motor, IEC motor and so on. This kind of product is widely used in drive fields such as textile, foodstuff, ceramice packing, logistics, plastics and so on.

1.1 Product characteristics

SKM SKB Seires helical gear units has more than 4 types. Power 0.12-4kw, Ratio 7.73-302.5, Torque max100-500 NM, Modulaw and multistructure can meet the demands of various conditions.

(1)Ground-hardened helical gears.
(2)Modularity, can be combined in many forms.
(3)Made of high-quality aluminum alloy, light in weight and nonrusting.
(4)Large in output torque, high efficiency, ene-rgy saving and environmental protection.
(5)The mounting dimension of SKM series are compatible with SMRV series worm gear unit(A part of SMRV050 dimensions are different from SKM28)
(6)The mounting dimension of SKB series are compatible with W series worm gear unit.

(7) Large output torque.
(8) Stable transmission with lower noise.
(9) High heat-radiating efficiency.
(10). Elegant shape, small volume and durable serving life.
(11)Suitable for omnibearing installation. 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Function: Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Customization:
Available

|

Customized Request

helical gearbox

The Basics of Designing a Cyclone Gearbox

Compared to conventional gearboxes, the cycloidal gearbox offers a number of advantages including a higher ratio of transmission, robustness against shock loads, and greater positioning accuracy. However, designing a cycloidal gearbox can be complicated. This article will discuss some of the basic design principles. In addition, it will cover topics such as size, position accuracy, and transmission ratios.

Basic design principles

Unlike a conventional ring gear, a cycloidal gearbox uses a cycloidal disc to provide torque multiplication. The output direction of the cycloidal gear disc is opposite to the rotation of the input shaft. This allows for more compact gear construction. It also allows for increased load capacity.
Cycloid drive kinematics can appear complex, but they are actually quite simple. Instead of rotating around the center of gravity like conventional gears, the cycloidal disc rotates around fixed pins. This provides a higher reduction ratio.
To reduce vibrations and noise, multiple cycloidal discs are used. This allows for uniform distribution of forces on the carrier pin devices. This also provides a better rotational balance. In addition, multiple cycloidal discs reduce the axial moment of the carrier pin devices.
The cycloidal gear disc is supported by a separate gear disc bearing. This design provides a low component count and reduces wear. This type of kinematics can also be used in an electric motor with a high power density.
The cycloidal gear disc provides a high reduction ratio, which allows for compact construction. Unlike a ring gear, the cycloidal disc has fewer teeth. It also provides a higher reduction ratio, which is advantageous for high rotational input speed applications.
Cycloid gear discs have cylindrical holes, which allow for carrier pin devices to protrude through them. This is useful because the carrier pin devices can roll along the inside wall of the cylindrical hole in the gear disc.
A load plate is also used to provide anchorage for external structures. This plate contains threaded screw holes arranged 15mm away from the center. It has a 9mm external diameter and a 3mm through hole.

Transmission ratios up to 300:1

cycloidal gearboxes are used in a wide range of applications, from machine tools to medical imaging devices. Compared to planetary gearboxes, they offer superior positioning accuracy, torsional stiffness, backlash, and fatigue performance.
Cycloid gearboxes are also capable of transmitting more torque than planetary gears. In addition, they have a lower Hertzian contact stress and higher overload protection. Cycloid gearboxes are able to provide transmission ratios up to 300:1 in a small package.
Cycloid gears also have lower backlash over extended periods, making them an ideal choice for applications with critical positioning accuracy. Cycloid gearboxes also have good wear resistance, as well as low friction. Cycloid gears are lightweight and have good torsional stiffness, making them ideal for applications with heavy loads.
Cycloid gearboxes have several different designs. They can provide transmission ratios up to 300:1 without the need for additional pre-stages. Cycloid gears also require more accurate manufacturing processes than involute gears. Cycloid gearboxes can also be used for applications that require high power consumption, and can withstand shock loads.
Cycloid gearboxes can be adapted to fit most common servomotors. They have a modular design, all-round corrosion protection, and easy installation. Cycloid gears have a radial clamping ring, which reduces inertia by up to 39%.
CZPT Precision Europe GmbH, a subsidiary of CZPT Group, has developed an innovative online configurator to simplify the configuration of gearboxes. CZPT cycloidal gearheads are precision-built, robust, and reliable. They have a two-stage reduction principle, which minimises vibration and provides even force distribution.
Cycloid gears are capable of providing transmission ratios from 30:1 to 300:1. Cycloid gearboxes can achieve high gear ratios because they require fewer moving parts, and they have a low backlash.helical gearbox

Robustness against shock loads

Unlike conventional gearboxes that are easily damaged by shock loads, the cycloidal gearbox is extremely robust. It is a versatile solution that is ideally suited for handling equipment, food manufacturing, and machine tools.
The mechanical construction of a cycloidal gearbox consists of several mechanical components. These include cycloidal wheels, bearings, transformation elements, and needles. In addition, it has high torsional stiffness and tilting moment. It is also accompanied by highly nonlinear friction characteristic.
In order to assess the robustness of the cycloidal gearbox against shock loads, a mathematical model was developed. The model was used to calculate the stress distribution on the cycloid disc. This model can be used as a basis for more complex mechanical models.
The model is based on new approach, which allows to model stiction in all quadrants of the cycloid gear. In addition, it can be applied to actuator control.
The mathematical model is presented together with the procedure for measuring the contact stress. The results are compared to the measurement performed in the real system. The model and the measurement are found to be very close to each other.
The model also allows for the analysis of different gear profiles for load distribution. In addition, it is possible to analyze contact stresses with different geometric parameters. The mesh refinement along the disc width helps to ensure an even distribution of contact forces.
The stiction breakaway speed is calculated to the motor side. The non-zero current is then derived to the input side of the gearbox. In addition, a small steady phase is modeled during the speed direction transition. The results of the simulation are compared to the measurement. The results show that the model is extremely accurate.

Positioning accuracy

Getting the correct positioning accuracy from a cycloidal gearbox is no small feat. This is because the gears are compact, and the clearances are relatively small. This means you can expect a lot of torque from your output shaft. However, this is only part of the picture. Other concerns, such as backlash, kinematic error, and loading are all important considerations.
Getting the best possible positioning accuracy from a cycloidal gearbox means choosing a reducer that is well-made and correctly configured. A properly-selected reducer will eliminate repeatable inaccuracies and provide absolute positioning accuracy at all times. In addition, this type of gearbox offers several advantages over conventional gearboxes. These include high efficiency, low backlash, and high overload protection.
Getting the correct positioning accuracy from a gearbox also involves choosing a supplier that knows what it is doing. The best vendors are those who have experience with the product, offer a wide variety, and provide support and service to ensure the product is installed and maintained correctly. Another consideration is the manufacturer’s warranty. A reputable manufacturer will offer warranties for the gearbox. The aforementioned factors will ensure that your investment in a cycloidal gearbox pays off for years to come.
Getting the correct positioning accuracy from your cycloidal gearbox involves choosing a manufacturer that specializes in this type of product. This is particularly true if you are involved in robotics, automated painting, or any other industrial process that requires the best possible accuracy. A good manufacturer will offer the latest technology, and have the expertise to help you find the best solution for your application. This will ensure your product is a success from start to finish.helical gearbox

Size

Choosing the right size of cycloidal gearbox is important for its efficient operation. However, it is not a simple task. The process involves complex machining and requires the creation of many parts. There are different sizes of cycloidal gearboxes, and a few basic rules of thumb can help you choose the right size.
The first rule of thumb for choosing the right size of cycloidal gearboxes is to use a gearbox with the same diameter of the input shaft. This means that the gearbox must be at least 5mm thick. The cycloid will also require a base and a bearing to hold the driveshaft in place. The base should be large enough to house the pins. The bearing must be the same size as the input shaft.
The next rule of thumb is to have a hole in the cycloid for the output shaft. In this way, the output will be back-drivable and has low backlash. There should be at least four to six output holes. The size of the holes should be such that the centerline of the cycloid is equal to the size of the center of the bearing.
Using a Desmos graph, you can then create the gear parameters. The number of pins should be equal to the number of teeth in the cycloidal gear, and the size of the pins should be twice the size of the gear. The radius of the pins should be equal to the value of C from Desmos, and the size of the pin circle should be equal to the R value.
The final rule of thumb is to ensure that the cycloid has no sharp edges or discontinuities. It should also have a smooth line.
China manufacturer Tkm Kpm Series Right Angle Horizontal Helical Gearbox for Belt Conveyor Transmission   cycloidal drive generatorChina manufacturer Tkm Kpm Series Right Angle Horizontal Helical Gearbox for Belt Conveyor Transmission   cycloidal drive generator
editor by CX 2023-05-15

China Belt Conveyor Gears Accuracy 6 Class Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing cycloidal drive mechanism

Product Description

Belt Conveyor Gears Precision 6 Course Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing

1. The vast and complete range of N collection for industrial programs
two. Lower-speed shaft layout: Cylindrical with crucial, splined, hollow with shrink disc or splined hollow shaft
3. Rigid and exact nodular forged iron casing
four. Lower noise running, substantial production good quality standard
5. High and reputable efficiency, load potential and minimal-speed shaft bearing

 

 

Remember to click here for more types!
 

 

Our Solutions

With all our pursuits DNV-ISO 9001, SGS -certified, we stand for leading-high quality service. Entrusting your gearboxes to the care of our Solutions.

Aid safeguard your gearbox from wear and grinding, SGR gearbox converts torque reliably and effi­ciently.
We customize our CZPT planetary gear units, double enveloping worm gearbox, helical gear motor, modular design and style helical gear unit, worm gearbox, cycloidal gearbox and so on to fit your application and meet up with your demands. 

These characteristics enable a reputable and safe services daily life of over 200 000 operational hours. 

Our clients have been positioning their have confidence in in CZPT gear models considering that 1997. More than 500 000 gear units of our gearbox are in use reliably close to the world, in many instances below extremely severe conditions.

 

Connected Goods

 

For far more reducers and mechanical add-ons, make sure you click here to look at

 

 

 

US $10-800
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Single-Step

###

Belt Conveyor Gears Accuracy 6 Class Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing Belt Conveyor Gears Accuracy 6 Class Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing
Belt Conveyor Gears Accuracy 6 Class Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing Belt Conveyor Gears Accuracy 6 Class Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing
US $10-800
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Single-Step

###

Belt Conveyor Gears Accuracy 6 Class Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing Belt Conveyor Gears Accuracy 6 Class Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing
Belt Conveyor Gears Accuracy 6 Class Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing Belt Conveyor Gears Accuracy 6 Class Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing

The Advantages of Using a Cyclone Gearbox

Using a cycloidal gearbox to drive an input shaft is a very effective way to reduce the speed of a machine. It does this by reducing the speed of the input shaft by a predetermined ratio. It is capable of very high ratios in relatively small sizes.helical gearbox

Transmission ratio

Whether you’re building a marine propulsion system or a pump for the oil and gas industry, there are certain advantages to using cycloidal gearboxes. Compared to other gearbox types, they’re shorter and have better torque density. These gearboxes also offer the best weight and positioning accuracy.
The basic design of a cycloidal gearbox is similar to that of a planetary gearbox. The main difference is in the profile of the gear teeth.
Cycloid gears have less tooth flank wear and lower Hertzian contact stress. They also have lower friction and torsional stiffness. These advantages make them ideal for applications that involve heavy loads or high-speed drives. They’re also good for high gear ratios.
In a cycloidal gearbox, the input shaft drives an eccentric bearing, while the output shaft drives the cycloidal disc. The cycloidal disc rotates around a fixed ring, and the pins of the ring gear engage the holes in the disc. The pins then drive the output shaft as the disc rotates.
Cycloid gears are ideal for applications that require high gear ratios and low friction. They’re also good for applications that require high torsional stiffness and shock load resistance. They’re also suitable for applications that require a compact design and low backlash.
The transmission ratio of a cycloidal gearbox is determined by the number of lobes on the cycloidal disc. The n=n design of the cycloidal disc moves one lobe per revolution of the input shaft.
Cycloid gears can be manufactured to reduce the gear ratio from 30:1 to 300:1. These gears are suitable for high-end applications, especially in the automation industry. They also offer the best positioning accuracy and backlash. However, they require special manufacturing processes and require non-standard characteristics.

Compressive force

Compared with conventional gearboxes, the cycloidal gearbox has a unique set of kinematics. It has an eccentric bearing in a rotating frame, which drives the cycloidal disc. It is characterized by low backlash and torsional stiffness, which enables geared motion.
In this study, the effects of design parameters were investigated to develop the optimal design of a cycloidal reducer. Three main rolling nodes were studied: a cycloidal disc, an outer race and the input shaft. These were used to analyze the motion related dynamic forces, which can be used to calculate stresses and strains. The gear mesh frequency was calculated using a formula, which incorporated a correction factor for the rotating frame of the outer race.
A three-dimensional finite element analysis (FEA) study was conducted to evaluate the cycloidal disc. The effects of the size of the holes on the disc’s induced stresses were investigated. The study also looked at the torque ripple of a cycloidal drive.
The authors of this study also explored backlash distribution in the output mechanism, which took into account the machining deviations and structure and geometry of the output mechanism. The study also looked at the relative efficiency of a cycloidal reducer, which was based on a single disc cycloidal reducer with a one-tooth difference.
The authors of this study were able to deduce the contact stress of the cycloidal disc, which is calculated using the material-based contact stiffness. This can be used to determine accurate contact stresses in a cycloidal gearbox.
It is important to know the ratios needed for calculation of the bearing rate. This can be calculated using the formula f = k (S x R) where S is the volume of the element, R is the mass, k is the contact stiffness and f is the force vector.helical gearbox

Rotational direction

Unlike the conventional ring gear which has a single axis of rotation, cycloidal gearbox has three rotational axes which are parallel and are located in a single plane. A cycloidal gearbox has excellent torsional stiffness and shock load capacity. It also ensures constant angular velocity, and is used in high-speed gearbox applications.
A cycloidal gearbox consists of an input shaft, a drive member and a cycloidal disc. The disc rotates in one direction, while the input shaft rotates in the opposite direction. The input shaft eccentrically mounts to the drive member. The cycloidal disc meshes with the ring-gear housing, and the rotational motion of the cycloidal disc is transferred to the output shaft.
To calculate the rotational direction of a cycloidal gearbox, the cycloid must have the correct angular orientation and the centerline of the cycloid should be aligned with the center of the output hole. The cycloid’s shortest length should be equal to the radius of the pin circle. The cycloid’s largest radius should be the size of the bearing’s exterior diameter.
A single-stage gear will not have much space to work with, so you’ll need a multistage gear to maximize space. This is also the reason that cycloid gears are usually designed with a shortened cycloid.
To calculate the most efficient tooth profile for a cycloidal gear, a new method was devised. This method uses a mathematical model that uses the cycloid’s rotational direction and a few other geometric parameters. Using a piecewise function related to the distribution of pressure angle, the cycloid’s most efficient profile is determined. It is then superimposed on the theoretical profile. The new method is much more flexible than the conventional method, and can adapt to changing trends of the cycloidal profile.

Design

Several designs of cycloidal gearboxes have been developed. These gearboxes have a large reduction ratio in one stage. They are mainly used for heavy machines. They provide good torsional stiffness and shock load capacity. However, they also have vibrations at high RPM. Several studies have been conducted to find a solution to this problem.
A cycloidal gearbox is designed by calculating the reduction ratio of a mechanism. This ratio is obtained by the size of the input speed. This is then multiplied by the reduction ratio of the gear profile.
The most important factor in the design of a cycloidal gearbox is the load distribution along the width of the gear. Using this as a design criterion, the amplitude of vibration can be reduced. This will ensure that the gearbox is working properly. In order to generate proper mating conditions, the trochoidal profile on the cycloidal disc periphery must be defined accurately.
One of the most common forms of cycloidal gears is circular arc toothing. This is the most common type of toothing used today.
Another form of gear is the hypocycloid. This form requires the rolling circle diameter to be equal to half the base circle diameter. Another special case is the point tooth form. This form is also called clock toothing.
In order to make this gear profile work, the initial point of contact must remain fixed to the edge of the rolling disk. This will generate the hypocycloid curve. The curve is traced from this initial point.
To investigate this gear profile, the authors used a 3D finite element analysis. They used the mathematical model of gear manufacturing that included kinematics parameters, output moment calculations, and machining steps. The resulting design eliminated backlash.helical gearbox

Sizing and selection

Choosing a gearbox can be a complex task. There are many factors that need to be taken into account. You need to determine the type of application, the required speed, the load, and the ratio of the gearbox. By gaining this information, you can find a solution that works best for you.
The first thing you need to do is find the proper size. There are several sizing programs available to help you determine the best gearbox for your application. You can start by drawing a cycloidal gear to help you create the part.
During sizing, it is important to consider the environment. Shock loads, environmental conditions, and ambient temperatures can increase wear on the gear teeth. The temperature also has a significant impact on lubrication viscosities and seal materials.
You also need to consider the input and output speed. This is because the input speed will change your gearbox ratio calculations. If you exceed the input speed, you can damage the seals and cause premature wear on the shaft bearings.
Another important aspect of sizing is the service factor. This factor determines the amount of torque the gearbox can handle. The service factor can be as low as 1.4, which is sufficient for most industrial applications. However, high shock loads and impact loads will require higher service factors. Failure to account for these factors can lead to broken shafts and damaged bearings.
The output style is also important. You need to determine if you want a keyless or keyed hollow bore, as well as if you need an output flange. If you choose a keyless hollow bore, you will need to select a seal material that can withstand the higher temperatures.
China Belt Conveyor Gears Accuracy 6 Class Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing     cycloidal drive mechanismChina Belt Conveyor Gears Accuracy 6 Class Shaft Mount Hollow Shaft Output Transmission Helical Gearbox with Extension Shaft for Bearing     cycloidal drive mechanism
editor by czh 2023-01-09

Mining shop made in China – replacement parts – in Ciudad Juarez Mexico Belt Conveyor Flame Retardant UHMWPE Coated Buffer Mining Machinery Parts with top quality

Mining  shop  made in China - replacement parts -  in Ciudad Juarez Mexico  Belt Conveyor Flame Retardant UHMWPE Coated Buffer Mining Machinery Parts with top quality

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 distinct branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Flame Retardant and antistatic Impact Bar

Flame retardant and antistatic Impact bar can meet the requirements of unique setting these kinds of as coal mine underground. This kind of solution developed by our firm fulfills the market requirements and has obtained the countrywide coal mine security merchandise license.

The item structure

Influence Bars is a fusion of three different levels:
-UHMWPE Cap
– Rubber
-Metal Slot
All areas of the effect bar are intently jointed by very hot vulcanization

Merchandise specification

Length  (mm) 500  600  800  1000  1220  1400  1524  1600  1800
Width  (mm) 100  250   
Height  (mm) 50  55  60  70  75  80  90  100
Thickness of wear resistant layer (mm) 8  10  12  13  15  20  25  30  40
Metallic slot
  • Aluminum slot , Iron slot
Regular Screw M12  M16  M18  M20  
1 Set of screws consists of bolts, gromment and nut
Sort Typical Large Elastic Flame Retardant Specific customization

Features and benefits
one. Substantial-high quality effect-resistant rubber supplies excellent cushioning and shock absorption, whilst rubber has flame retardant, antistatic properties, can be utilised to make certain the protection of unique places
2. The UHMW-PE also has flame retardant and antistatic houses.The high good quality surface area has excellent sliding homes, will decrease properly the dress in on the conveyor belt.
3.T-slot” extruded metallic design makes it possible for fixing of our influence bars alongside the total size of the affect bar which makes it possible for for less complicated installation and disassembly.
4. Created by sizzling vulcanization which leads in an effective and trustworthy jointing between the parts. 

Organization Introduction:

Our factory locates in HangZhou,ZheJiang , close to an hour from ZheJiang by car.

We are a professional producer of conveying components, such as :Affect bar, conveyor polyurethanen scraper, polyurethanen sheet, cleaner TC blade with rubber foundation, replaceable rubber pulley lagging, conveyor belt side rubber skirt, and different types of custom-made conveying products goods.

We have Certificate :ISO, IATF16949,SGS, Saftey Certificate of Acceptance for Mining Products, and many others. 

We have substantial top quality management, prosperous knowledge, experienced generation line, advanced gear make sure quality and regularity

FAQ
Q: Are you a trading organization or company ?
A: We are a manufacturer with specialised production equipments and screening devices.
 
Q: Can I get a sample for screening ? How do it billed ?
A: Of course, the sample is totally free of cost, but we will not bear the Convey expenses. 

Q:  What is the gain of SIMA in comparison to EPT businesses in the business?
A:Our organization has superior automatic production traces, uniform and secure top quality, to achieve sustainable and effective expert generation. We also have wealthy experience in R&D and production crew, can provide consumers with the highe EPT top quality goods and quality companies.

Q: What is the price tag plan of your company?
A: In our business, the price tag is different in accordance to the quantity of your purchase, the more the less costly. For much more detailed details, please contact our buyer service representatives. The expert staff will provide you 24/7 provider.

Q:What are the characteristics of the companies your organization provided?
A: Primarily based on the vast assortment of our goods, We can provide very first-course one-end sourcing support. It will enhance your performance significantly and be much more cost-effective.

Q: Can you manufacture the distinct EPT equipment products in accordance to the customer’s drawings or samples?
A: Sure, we can develop the new goods as the customer’s request,these kinds of as Influence bed,belt cleaner,rubber and polyurethane items,and so on.

Q: Do you have international knowledge for your items?
A: Of course, we have exported our merchandise to Usa , Australia, German, Korea ,British isles, The Philippines, Indonesia,and so forth. 
 
Make contact with Details:

Contact me for much more details
 

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 diverse branches. For far more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original gear manufacturer’s (OEM) component figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our firm and the shown substitution parts contained herein are not sponsored, accepted, or produced by the OEM.

Mining  shop  made in China - replacement parts -  in Ciudad Juarez Mexico  Belt Conveyor Flame Retardant UHMWPE Coated Buffer Mining Machinery Parts with top quality

Mining  shop  made in China - replacement parts -  in Ciudad Juarez Mexico  Belt Conveyor Flame Retardant UHMWPE Coated Buffer Mining Machinery Parts with top quality

Mining Cost made in China – replacement parts – in Lilongwe Malawi Roller Belt Conveyor Tail Pulley with top quality

Mining  Cost  made in China - replacement parts -  in Lilongwe Malawi  Roller Belt Conveyor Tail Pulley with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Mining roller belt conveyor tail pulley

Huayue EPT Pulley Specification:
1. Pulley Diameter: 250-1800mm.
2. Belt width: 300mm to 2400mm.
3. Length: Depend on the belt width.
4. Welding: Carbon dioxide arc welding, argon arc welding, electrode welding etc.; In accordance with AWS standard or substitute welding standard
5. Lagging: Cold lagging; Hot vulcanized lagging, ceramic lagging
6. Pulley tube material: Q235 seamless carbon steel.
7. Professional pulley production line.
8. Professional designing and inspection team.
9. Certification: ISO, BV, etc

Type of EPT Pulley:
EPT tail pulley
EPT head pulley
EPT rubber lagging pulley
EPT steel pulley
EPT driving pulley
EPT turnaround pulley
Pattern conveyor pulley
EPT pulley
Rubber conveyor pulley
Head pulley etc.

EPT Head Tail pulley:
Head pulley can be divided into driving pulley (head pulley) and thurn about pulley (tail pulley), driving pulley is the main part for transmitting the power: Smooth surface and rubber surface, and rubber surface can be classified into smooth rubber surface, herringbone rubber surface and diamond rubber surface to meet different technical requirements. Averting pulley can be classified into smooth rubber surface and smooth steel surface.
Construction
All the pulley adopt integrated bearing housing which is lubricated and filled with grease and has two kinds: Iron casting and steel casting, the shaft is made of 45#steel, the shell adopt weld assembly.

Our be EPT quality based on:
Manufacturer
Experience in Cooperate with EPT 500 Companies
Professional EPT Capability
Stable Quality
Reasonable Price
Small Orders Accepted
Continuous Improvements
High Product Performance
Prompt Delivery
Professional Service

For more details, please inquiry us!
Polyester conveyor belt, (EP)
Nylon conveyor belt, (NN)
Cotton conveyor belt, (CC)
Sidewall conveyor belt (SW)
Steel Cord conveyor belt ( EPT )
Chevron conveyor belt, (C5 C10 and C15)
Oil Resistance conveyor belt, (OR and MOR)
Hot Resistance conveyor belt, (HR)
Fire Resistance conveyor belt, (FR/PVC/PVG)
Heat Resistance conveyor belt, (HR/ FR)
Cold Resistance conveyor belts, (CR)
Pattern conveyor belt ( 30+ Moulds)
Metal Mesh conveyor belt (Heat resistant temp until 800c)
Endless belts
EPT roller, idler
EPT Pulley, frame, bracket etc

Type Belt width (mm) Standard Diameter(mm)  Length (mm) 
Drive  Head Pulley 500 500 Length of the pulley depends on
 the belt width of the conveyor
650 500, 630
800 500, 630, 800
1000 630, 800, 1000
1200 630, 800, 1000
1400 800, 1000
 Tail Pulley 500 250, 315, 400, 500
650 250, 315, 400, 500
800 250, 315, 400, 500, 630, 800, 1000
1000 250, 315, 400, 500, 630, 800, 1000
1200 250, 315, 400, 500, 630, 800, 1000
1400 250, 315, 400, 500, 630, 800, 1000

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Mining  Cost  made in China - replacement parts -  in Lilongwe Malawi  Roller Belt Conveyor Tail Pulley with top quality

Mining  Cost  made in China - replacement parts -  in Lilongwe Malawi  Roller Belt Conveyor Tail Pulley with top quality

T2.5 near me shop made in China – replacement parts – T5 T10 8m in Bien Hoa Viet Nam Aluminium Gt2 Timing Belt Pulley with top quality

T2.5  near me shop  made in China - replacement parts - T5 T10 8m  in Bien Hoa Viet Nam  Aluminium Gt2 Timing Belt Pulley with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

T2.5/T5/T10/8M Aluminium Gt2 Timing Belt Pulley

1. Teeth Type: T2.5,T5,T10,T20,MXL,XL,L,H,XH,XXH,XXL,SL9,SL12,SL,HTD:3M,5M,8M,14M,20M, STPD/STS type(S2M,S3M,S4.5M,S5M,S8M,S14M) GT2 AND SO ON

2. Material: aluminum, carbon steel, brass and nylon available.

3. Surface treatment: blacken, anodize, zinc-plating and so on

4. Tolerance: conform to customers requirement

5. EPT service offered

Main Products

Company Information

 

HangZhou EPT Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.

Due to our sincerity in offering be EPT service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the tru EPT of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets.Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide be EPT services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

Packaging & Shipping

 

Exhibition

 

contact us

 

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

T2.5  near me shop  made in China - replacement parts - T5 T10 8m  in Bien Hoa Viet Nam  Aluminium Gt2 Timing Belt Pulley with top quality

T2.5  near me shop  made in China - replacement parts - T5 T10 8m  in Bien Hoa Viet Nam  Aluminium Gt2 Timing Belt Pulley with top quality

Stainless made in China – replacement parts – in Kayamkulam India Steel Woven Screen Wire Mesh Belt with ce certificate top quality low price

Stainless  made in China - replacement parts -  in Kayamkulam India  Steel Woven Screen Wire Mesh Belt with ce certificate top quality low price

We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 various branches. For a lot more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Stainless Steel Woven Screen Wire Mesh Belt

The stainless steel display screen mesh belt is manufactured of stainless metal SUS304 or 316 wires, with characteristics of easy floor, no rust, corrosion resistance, no poison, sanitation and environmental defense, is broadly utilized in the mining, chemical, meals, petroleum, medicine and EPT industries, primarily used for media separation like gas, liquid filtration etc.

Usage: filtering, screening, pasta, meat barbecue, residing basket like fruit basket, using electrolytic polishing engineering for area treatment method, vibrant floor is as a mirror.

Specification

Item Title  Stainless Metal Filter Mesh
Width  1000-6000mm
Wire Diameter  0.04mm-1.5mm
Materials  304/304L/316/316L
Woven Type  Plain / Twill / Simple Dutch / Twill Dutch
Features  Heat Resistance, Acid Resistance, Corrosion Resistance, Put on Resistance
Apps  Mining, Chemical, Food, Petroleum, Medicine and EPT industries, largely employed for media separation like gasoline, liquid filtration etc

Merchandise image

Product depth

Business check out

Founded in 2001, ZheJiang EPT EPT EPT Co., Ltd. is positioned at city of metal conveyor belt – HangZhou, China. With workshop handles an spot of more than sixteen, 000 sq. meters, it specialise in R&D, design and style, creation and sale of all kinds conveyor belts and chains. There are much more than 10 engineers and 120 employees and employees at our manufacturing facility now.

Our main merchandise are as followings: Chain driven belts, chain plate belts, roller conveyor, spiral belts, flat wire belts, flat flex belts, eye link belts, sprockets, and many others. We can also design, create and OEM all kinds of conveyors in accordance to your needs. 

“Very good Good quality, Be EPT Support” is our principle, welcome pals from all over the planet to pay a visit to and enquiry.

Make contact with us

 

The use of authentic equipment manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our business and the shown alternative parts contained herein are not sponsored, accredited, or manufactured by the OEM.

Stainless  made in China - replacement parts -  in Kayamkulam India  Steel Woven Screen Wire Mesh Belt with ce certificate top quality low price

Stainless  made in China - replacement parts -  in Kayamkulam India  Steel Woven Screen Wire Mesh Belt with ce certificate top quality low price

Stainless  made in China - replacement parts -  in Kayamkulam India  Steel Woven Screen Wire Mesh Belt with ce certificate top quality low price