Tag Archives: ac motor

China factory AC Motor Worm Gearbox for Logistics Industry with Good quality

Product Description

Technical Features

  The high degree of modularity is a design feature of SRC helical gearboxes range. It can be connected respectively with motors such as normal motor, brake motor, explosion-proof motor, frequency conversion motor, servo motor, IEC motor and so on. This kind of product is widely used in drive fields such as textile, foodstuff, ceramics packing, logistics, plastics and so on. It is possible to set up the version required using flanges or feet.
 

 

Products characteristics 

  SRC series helical gear units has more than 4 types. Power 0.12-4kw; Ratio 3.66-54; Torque max 120-500Nm. It can be connected (foot or flange) discretionary and use multi-mounting positions according to customers requirements.

Ground-hardened helical gears;

Modularity,can be combined in many forms;

Aluminium casing, light weight;

Gears in carbonize hard, durable;

Universal mounting;

Refined design,space effective and low noise

Structure feature

Model illuminate

1

Code for gear units series

2

No F code means foot mounted.With F code B5 flange mounted.With Z code B14 flange mounted

3

Specification code of gear units 01

4

I,II,III,B5 Output flange specification,default I not to write out is ok  

5

IEC: Input flange  HS: shaft input

6

Transmission ratio of gear units

7

M1:Mounting position, default mounting position M1 not to write out is ok

8

Position diagram for motor terminal box,default position o°(R) not to write out is ok

9

No mark means without motor   Model motor(poles of power)

10

Voltage – frequency

11

Coil in position for motor, default position S not to write out is ok

 

 

4.2 Rotation speed n

 

n1 Gear units input speed

 

n2 Gear units output speed

 

  If driven by the external gearing,1400r/min or lower rotation speed is suggested so as to optimize the working conditions and prolong the service life.Higher input rotation speed is permitted, but in this situation,the rated torque M2 will be reduced
   

 

4.5 Service factor fs

 

The effect of the driven machine on the gear unit is taken into account to a sufficient level of accuracy using the service factor fs. The service factor is determined according to the daily operation time and the starting frequency Z. Three load classifications are considered depending on the mass acceleration factor. You can read off the service factor applicable to your application in following figure. The service factor selected using this diagram must be less than or equal to the service factor as given in the performance parameter table.

 

* starting frequency Z: The cycles include all starting and braking procedures as well as change overs from low to high speed

 

SRC02..(HS)  Performance parameter

 

kw

Output speed

Torque

Speed ratio

fs

Model

IEC

0.37

16.7rpm

204N.M

54

1.0

SRC02

80B5/B14

 

 

Helical gearbox outline dimension heet

Foot Code U V V1 V2 V3 W X X1 Y Z
B02 18 107.5 60 130 11 136 155 100 17
M02 25 85 110 120 9 112 145 80 15
M01 18 80 110 120 9 118 145 80 15
B01 18 87 50 110 9 118 130 90 15

SRC helical gearbox with motor mounting position and terminal box orientation

Package
1 pc / carton,several cartons / wooden pallet

Application: Motor
Layout: Cycloidal
Hardness: Soft Tooth Surface
Installation: Vertical Type
Step: Stepless
Type: Worm Gear Box
Customization:
Available

|

Customized Request

helical gearbox

How to Calculate Transmission Ratio for a Cycloidal Gearbox

Using a cycloidal gearbox can be very useful in a wide variety of situations. However, it’s important to understand how to use it properly before implementing it. This article discusses the benefits of using a cycloidal gearbox, how to calculate the transmission ratio, and how to determine the effects of dynamic and inertial forces on the gearbox.

Dynamic and inertial effects

Various studies have been done to study the dynamic and inertial effects of cycloidal gearboxes. These studies have been performed using numerical, analytical and experimental methods. Depending on the nature of the load and its distribution along the gear, a variety of models have been developed. These models use finite element method to determine accurate contact stresses. Some of these models have been developed to address the nonlinear elasticity of contacts.
Inertial imbalance in a cycloidal gearbox causes vibration and can affect the efficiency of the device. This can increase mechanical losses and increase wear and tear. The efficiency of the device also depends on the torque applied to the cycloidal disk. The effectiveness of the device increases as the load increases. Similarly, the nonlinear contact dynamics are also associated with an increase in efficiency.
A new model of a cycloidal reducer has been developed to predict the effects of several operational conditions. The model is based on rigid body dynamics and uses a non-linear stiffness coefficient. The model has been validated through numerical and analytical methods. The model offers drastic reduction in computational costs. The model allows for a quick analysis of several operational conditions.
The main contribution of the paper is the investigation of the load distribution on the cycloidal disc. The study of this aspect is important because it allows for an analysis of the rotating parts and stresses. It also provides an indication of which gear profiles are best suited for optimizing torque transmission. The study has been conducted with a variety of cycloidal gearboxes and is useful in determining the performance of different types of cycloidal gearboxes.
To study the load distribution on the cycloidal disc, the authors investigated the relationship between contact force, cycloidal gearboxes and different gear profiles. They found that the non-linear contact dynamics have a large impact on the efficiency of a cycloidal gearbox. The cycloidal gearbox is an ideal solution for applications that involve highly dynamic servos. It can also be used in machine tool applications and food processing industries.
The study found that there are three common design principles of cycloidal reducers. These are the contact force distribution, the speed reduction and the trochoidal profile of the cycloidal disc. The trochoidal profile has to be defined carefully to ensure correct mating of the rotating parts. The trochoidal profile provides an indication of which gear profiles are best for optimizing torque transmission. The contact force distribution can be improved by refining the mesh along the disc’s width.
As the input speed increases, the efficiency of the reducer increases. This is because contact forces are constantly changing in magnitude and orientation. A cycloidal reducer with a one tooth difference can reduce input speed by up to 87:1 in a single stage. It also has the ability to handle high-cycle moves without backlash.helical gearbox

Transmission ratio calculation

Getting the correct transmission ratio calculation for a cycloidal gearbox requires a good understanding of what a gearbox is, as well as the product that it is being used for. The correct ratio is calculated by dividing the output speed of the output gear by the input speed of the input gear. This is usually accomplished by using a stopwatch. In some cases, a catalog or product specification may be required. The correct ratio is determined by a combination of factors, such as the amount of torque applied to the mechanism, as well as the size of the gears involved.
A cycloidal gear is a type of gear tooth profile that can be represented using a spline. It is also possible to model a gear with a cycloidal profile by using a spline to connect points against the beginning of a coordinate system. This is important in the design and functionality of a gear.
There are many different gears used in machines and devices. These include the herringbone gear, the helical gear and the spiral bevel gear. The best transmission ratios are typically obtained with a cycloidal gearbox. In addition to ensuring the accuracy of positioning, a cycloidal gearbox provides excellent backlash. Cycloid gears have a high degree of mechanical efficiency, low friction, and minimal moment of inertia.
A cycloidal gearbox is often referred to as a planetary gearbox, though it is technically a single-stage gearbox. In addition to having a ring gear, the gearbox has an eccentric bearing that drives the cycloidal disc in an eccentric rotation. This makes the cycloidal gearbox a good choice for high gear ratios in compact designs.
The cycloid disc is the key element of a cycloidal gearbox. The cycloid disc has n=9 lobes, and each lobe of the disc moves by a lobe for every revolution of the drive shaft. The cycloid disc is then geared to a stationary ring gear. The cycloidal disc’s lobes act like teeth on the stationary ring gear.
There are many different gears that are classified by the profile of the gear teeth. The most common gears are the involute and helical gears. Most motion control gears include spur designs. However, there are many other types of gears that are used in various applications. The cycloidal gear is one of the more complicated gears to design. The cycloid disc’s outline can be represented using markers or smooth lines, though a scatter chart will also do.
The cycloid disc’s lobes rotate on a reference pitch circle of pins. These pins rotate 40 deg during the eccentric rotation of the drive shaft. The pins rotate around the disc to achieve a steady rotation of the output shaft.
The cycloid disc’s other obvious, and possibly more important, feature is the’magic’ number of pins. This is the number of pins that protrude through the face of the disc. The disc has holes that are larger than the pins. This allows the pins to protrude through the disc and attach to the output shaft.helical gearbox

Application

Whether you’re building a robot drive or you’re simply looking for a gearbox to reduce the speed of your vehicle, a cycloidal gearbox is a great way to achieve a high reduction ratio. Cycloidal gearboxes are a low-friction, lightweight design that has an extremely stable transmission. They are suitable for industrial robots and can be used in many applications, including positioning robots.
Cycloidal gearboxes reduce speed by using eccentric motion. The eccentric motion enables the entire internal gear to rotate in wobbly cycloidal motion, which is then translated back into circular rotation. This eliminates the need for stacking gear stages. Cycloidal gearboxes also have less friction, higher strength, and greater durability than conventional gearboxes.
The cycloidal gearbox is also used in a number of applications, including marine propulsion systems, and robot drives. Cycloidal gearboxes reduce vibration by using offset gearing to cancel out vibrations.
Cycloidal gears have lower friction, higher strength, and better torsional stiffness than involute gears. They also have a reduced Hertzian contact stress, making them better than involute gears for use with shock loads. They also have a smaller size and weight than conventional gearboxes, and they have a higher reduction ratio than involute gears.
Cycloidal gears are typically used to reduce the speed of motors, but they also offer a number of other advantages. Cycloidal gearboxes have a smaller footprint than other gearboxes, allowing them to fit into confined spaces. They also have low backlash, allowing for precise movement. Cycloidal gears have a higher efficiency, resulting in lower power requirements and lower wear.
The cycloidal disc is one of the most important components of the gearbox. Cycloidal discs are normally designed with a short cycloid, which minimizes the eccentricity of the disc. They are also designed with a shortened flank, resulting in better strength and less stress concentration. Cycloidal discs are typically geared to a stationary ring gear. The cycloid is designed to roll around the stationary ring pins, which push against the circular holes in the disc. Cycloidal gearboxes typically employ two degrees of shift.
Cycloidal drives are ideal for heavy load applications. They also have high torsional stiffness, which makes them highly resistant to shock loads. Cycloidal drives also offer a high reduction ratio, which can be achieved without the need for a large input shaft. They are also compact and have a high service life.
The output shaft of a cycloidal gearbox always has two degrees of shifting, which ensures that the input and output shafts always rotate at a different speed. The output shaft would be a pin casing around the drive disks, which would also allow for easy maintenance.
Cycloidal gearboxes are also very compact and lightweight, so they are ideal for use in industrial robots. The cycloidal gearbox reducer is the most stable, low-vibration reducer in industrial robots, and it has a wide transmission ratio range.
China factory AC Motor Worm Gearbox for Logistics Industry   with Good quality China factory AC Motor Worm Gearbox for Logistics Industry   with Good quality
editor by CX 2023-05-22

China New design Induction 1000w Ac Gearbox China Speed Reducer For Electric Motor 135kw with high quality automatic gearbox

Warranty: 1 calendar year, 1 Yr
Applicable Industries: Producing Plant, Equipment Repair Retailers, Farms, Vitality & Mining
Bodyweight (KG): 50 KG
Customized assist: OEM, ODM, OBM
Gearing Arrangement: Helical / Cycloidal
Output Torque: top to 37000NM
Enter Pace: 500/750/1000/1500/3000rpm
Output Speed: .5-2000rpm
Product identify: CZPT transmission gearbox/ reducer for one extruder
Mounting Placement: Horizontal (foot Mounted)
Coloration: Blue/ As your ask for
Application: Equipment Resource
Material: Forged Iron
Variety: CZPT sequence plastic extruder gearbox
Certificate: ISO9001
Product: ZLYJ112/133/146/173/two hundred/225/250/280/315/330/375/420/450/560/630
Ratio: 8/ten/twelve.5/fourteen/16/eighteen/20
Packaging Details: Modest size: common export packing (carton and pallet) Scorching Sale 1KW 220v 3000rpm AC servo motor with driver
Big dimension: fumigated wooden carton or non-wood packing material carton
Port: ZheJiang or HangZhou

Specification CZPT series speed reducer is substantial precision challenging teeth surfac transmission part with push stand designed for plastic screw extruder. The design of item adapts all specialized restrictions stipulated in JB/T9571-1999It function that gear and areas of haltare made from large toughness alloy metal. The gear is manufactured by way of various processing systems these kinds of as carburizing, quench.ing, tooth grinding, etc. The accuracy of equipment is the quality of GB10095-88.6. The hardness of teeth floor reaches HRC54-sixty two. AT the front conclude of hollow output shaft, t is equipped with tremendous thrust bean earing.o seal and so on, adapt domestic quali.ing to withstand the operating recoil. The primary regular parts, this kind of as fed products. As ask for. t can also be geared up with importedproducts. It festures compact, OEM Tailored CNC machining aluminum turning fittings Stainless metal machining areas large recognized capacity. steady transmission, reduced sound, substantial effectiveness, and so on. The residence of item sreached global advanced amount and can replace the exact same imported goods.The specification and transmission ratio in the series products arecommon date of customers. When deciding on, consumers can com-pareactual transmission torque of screw with the permitted output torque detailed in desk 2. (the torque in the desk has deemed functioning condion co-productive and safe co-productive, it might bechosen in 1: 1directly )and might choose with the output torque asbase. If it need to have to be geared up with rubber extruder, the rubber extruder has much better impact pressure than plastic extruder. Make sure you supply detailded specialized parameters and seek advice from the create-ment section of our business and then determine the model to be selected

Specification
TypeZLYJ sequence plastic extruder gearbox
Material Cast Iron
ColorAs your ask for
ModelZLYJ112/133/146/173/200/225/250/280/315/330/375/420/450/560/630
Input velocity1500/1200/1000/750/600
Ratio8/ten/12.5/14/sixteen/18/20
Screw diameter35/forty five/fifty/fifty five/sixty five/seventy five/90/a hundred/one hundred and five/110/one hundred twenty/a hundred thirty/150/a hundred and sixty/165
Spare partcoller, 8000 collection cycloidal equipment box velocity reducer equipment variator transmission electric worm equipment screw jack value oil pump
Related product Firm Introduction Packing & Shipping

The Different Types of Gearboxes

There are many different types of gearboxes. Some brands have more than one type. In this article, we’ll discuss the planetary gearbox, the worm reduction gearbox, the shaft mounted gearbox, and the one speed gearbox. This article will also help you determine which type of gearbox is best for your vehicle. And don’t worry if you don’t know the terminology yet. We’ll explain each type in detail so that you know what you’re getting yourself into.
gearbox

Planetary gearbox

Planetary gears have many advantages. The multiple gears in a planetary gearbox mesh simultaneously during operation. As such, they provide high efficiency and transmit high transmittable torque. These gears are widely used in various industries and are resistant to high shock loads and demanding conditions. CZPT is one of the companies that offer planetary gearboxes. Its products do not require special tools for assembly, and its scalable design minimizes safety stock.
Among the numerous benefits of planetary gearing is its compactness and lightweight. As such, it is suitable for wide applications with space and weight constraints. However, to truly appreciate its benefits, it is necessary to understand its mechanisms. Here are some of the most common details about planetary gearing:
The planetary gearbox has two mounted gears: an input shaft and an output shaft. Each gear has multiple teeth that are attached to a carrier and rotate with the input shaft. The carrier is connected to the output shaft. A planetary gear is mounted on both gears via a carrier. The carrier rotates in order to drive the planetary gear. The sun gear is often the input gear. The other gear is called the outer gear.
Planetary gearboxes are highly customizable. The size, mounting, and housing options vary, as do the reduction ratios and input speeds. Different types can be manufactured for different applications and include options such as electrical or mechanical preload. The final design of a planetary gearbox can be highly customized, based on the specifications of the application. By combining engineering excellence and ongoing innovation, planetary gearboxes provide years of trouble-free operation.
A planetary gearbox can be either an electric motor or a manual one. The latter has more features than the former, and can be used in applications where space is an issue. The primary features of a planetary gearbox include its backlash, torque, and ratio. Secondary features include noise, corrosion resistance, and construction. A planetary gearbox is a highly versatile gearbox that can drive anything from simple machinery to advanced electrical systems.
gearbox

Worm reduction gearbox

The global worm reduction gearbox market report compiles key insights from the industry to help you improve your business strategy. This report will help you create a comprehensive business document that will enhance your company’s competitive edge. To obtain this report, visit our website now! Read our latest report to find out what you can expect from the global worm reduction gearbox market. Alternatively, request a sample copy for more details. Here is a sneak peek of the report:
Worm gears are made with different thread counts and are usually not matched with the CZPT standard. In general, a single thread worm should be used with a single thread worm. Worm gears have either right or left threads, and their thread count will be different as well. This type of gear is used to reduce the speed of a rotating shaft. The speed reduction ratio will be about 50 percent if the worms have the same thread count as the CZPT gears.
The standard gear set transfers power at the peak load point of a tooth, called the pitchline. The worm gear moves slowly against the wheel’s metal surface. The worm gear is also more complex than the standard gear because the worm is sliding rather than rolling. Worm gears are hard to lubricate. Moreover, the sliding contact between the gear and worm increases the complexity of the gear set. They can be a great solution for applications where noise is a significant factor.
The axial pitch and circular pitch of the worm are equal. The ratio of these two indices determines the speed of transmission. For a worm reduction gearbox to work, the axial pitch and the circular pitch must match. The pitch angle of a worm can either be left-handed or right-handed. The lead of a worm is the distance one thread travels in one revolution. The lead angle is the angle tangent to the thread helix of the cylinder’s pitch. When a worm mesh is reversed, the majority of the mesh will be on the receding arc.
Worm gears generate more heat than their counterparts, so it is important to choose a worm reduction gearbox carefully. You will want to choose the material and amount of lubricating oil carefully. Worm gears are generally made of tin bronze. The paired worms are hardened to HRC45-55. In general, they are durable, lasting up to ten years. But they will wear out – and they wear out – so you may want to consider some other factors.

Shaft-mounted gearbox

Shaft-mounted gearboxes are designed for a variety of mining and quarry applications. Their high reliability and low maintenance make them an excellent choice in these types of applications. Shaft-mounted gearboxes also feature an optional backstop device that prevents the unit from rotating in one direction. This makes them an excellent choice for applications where alignment accuracy is an issue. Here are some of the benefits of using a shaft-mounted gearbox:
Shaft-mounted gearboxes are typically constructed of aluminium, and come in sizes ranging from 050 to 125. They feature a variety of reduction ratios and ensure optimum efficiency in all operating conditions. New S series sizes, 140 and 150, extend the application range of shaft-mounted gearmotors. They are both backed by a two-year warranty. For even greater peace of mind, Shaft-mounted gearboxes are available with a range of warranty options.
The most common applications for a Shaft-mounted gearbox include traction-driven applications where a low-speed shaft is required for operation. They also are suitable for applications without a foundation, where the motor is mounted next to the reducer. To prevent the gear drive from rotating, a torque arm is attached between the motor and the shaft. Small-sized shaft-mounted gear drives are usually made without motor mount kits, which can make them an excellent choice for conveying light loads.
Another important feature of a Shaft-mounted gearbox is its mounting position. The reduced motion through the drive is redirected through the shaft, creating additional forces. These additional forces can affect the performance of the gearbox, causing vibrations and noise. Consequently, it is important to replace worn or damaged belts on a regular basis. Further, shaft-mounted gearboxes can be affected by problems with other components and amplify vibrations.
gearbox

1 speed gearbox

CZPT Group Components produces one speed gearboxes. These transmissions are produced in the CZPT Group’s Kassel plant. They are compact and robust, and are designed for easy integration. The Bosch Rexroth GD1 one-speed gearbox is easy to install horizontally or vertically. The Plug and Drive system integrates the gearbox with the existing cooling system. There are many other benefits to this gearbox.
With an ID.3 electric drive motor, the maximum torque is delivered at 16,000 rpm. This single-speed transmission offers high power density and excellent noise-reduction, making it ideal for electric vehicles. The e-drive motor is extremely quiet and requires precision manufacturing. The e-drive motor also enables a wide range of driving conditions. It can reverse when needed, and reaches its maximum speed at 16,000.
The single-speed gearbox is a standard feature on most electric vehicles. Some electric vehicles, such as the Porsche Taycan, will be equipped with a two-speed gearbox. This gearbox offers more top speed and range, but it is more complex than a standard single-speed gearbox. CZPT doesn’t need to add complexity to its electric vehicles. After all, a 355 horsepower family wagon is not likely to need a dual-speed gearbox.
In addition to simplifying the transmission, the patent claims also address improvements in structural design. Fig. 5 shows a schematic representation of a transmission 50′, wherein gear sets Z1 and Z4 are exchanged between partial transmissions. This switch matrix also reflects the synchronized gears and lastshelf gears. Hydraulically betatigte Lamellenkupplungen (HBA) also form a last-shelf gear.
Another advantage of the patent claim is that it offers numerous functional freedoms, which is especially valuable in the design of an automobile. One of the patent claims identifies a tosatzlicher middle gear that allows a driver to switch between second and third gears, with a single gearbox. In a conventional one-speed transmission, the tosatzlicher middle gear is attached to the second and first part gearbox. The latter has a second and third gear.

China New design Induction 1000w Ac Gearbox China Speed Reducer For Electric Motor 135kw with high quality     automatic gearbox	China New design Induction 1000w Ac Gearbox China Speed Reducer For Electric Motor 135kw with high quality     automatic gearbox
editor by czh 2023-02-17

300W made in China – replacement parts – in Ibague Colombia 104mm 220V Electric AC Induction Motor with Fan with ce certificate top quality low price

300W  made in China - replacement parts -  in Ibague Colombia  104mm 220V Electric AC Induction Motor with Fan with ce certificate top quality low price

300W  made in China - replacement parts -  in Ibague Colombia  104mm 220V Electric AC Induction Motor with Fan with ce certificate top quality low price

We – EPG Team the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For far more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Merchandise Description

 

Induction Motor Features 

one. Generally,Micro induction motor refers to the motor rotated by the induction. Induction motor relies on capacitor and electromagnetism when starting up and rotating. Though its starting torque is not quite substantial,it has a simple framework,large performance and can rotated keep on.

two. The solitary period motor have a reverse direction with the rotating when operated.P EPT change the route of one period motor rotation only after bring the motor to a stop.

3. Three phase motor relies on three period source. It has a substantial performance and can get a higher commencing torque.

 

Motor  Kind

Output Electricity

W

Voltage

V

Frequency

Hz

Present

A

Commencing Torque

mN.m

Rated Torque

mN.M

Rated pace

 

r/min

Capacitor

μF

Rated Time

   

min

Round shaft Gear shaft
6IK250/300A-AF 6IK250/300GU-AF 250/300 1ph 110 fifty 7.371 two.759 two.122 1350 40/250 continuous
sixty 7.371 2.217 1.705 1650
6IK250/300A-CF 6IK250/300GU-CF 250/three hundred 1ph 220 fifty 3.686 two.759 two.122 1350 12/450 continuous
sixty 3.686 2.217 1.705 1680
6IK250/300A-SF 6IK250/300GU-SF 250/300 3ph 220 fifty 4.631 3.608 two.122 1350   continuous
sixty 4.631 2.899 1.705 1680
6IK250/300A-UF 6IK250/300GU-UF 250/three hundred 3PH 380 fifty 2.681 3.608 2.122 1350 continuous
60 2.681 two.899 one.705 1680

Packaging & Shipping and delivery

Packing Method 

one.Outer packing: Common export carton with required shipping and delivery marks

two.Interior packing: Water-resistant packing with shock absorbing EPE and cardboard surrounded

three.As for every the customers demands

Supply & Cargo Method 

We will ship the things soon after the payment.

We can ship to you by UPS/DHL/TNT/EMS/Fedex,by air and by sea.  

For the Nations around the world & Regions in which EMS can’t produce,p EPT decide on EPT transport techniques

P EPT contact us right and we will use your preferred ways 

 

Our Providers

1. Cost-free servicing inside of 12 months permanent.

two. Professional investigation and advancement group.

three. Technological support for installation.

4. Rigid high quality handle method.

5. Customize generation.

6. Competitive price tag.

Organization Info

Lunyee Industries Growth Co., Ltd. is a leading producer for factory automation (FA) products ,we focus on energy transmission and motion control answers! 

our principal manufacturing are electricity transmission goods like AC and DC(brush/brushless)gear motor, stepper motor,large precision planetary gearbox (spur/helical gear)for stepping motor etc

Welcome to check out our web site to uncover more information http://lunyee.en.alibaba.com

 

FAQ

Q: Are you investing company or maker ?
A: We are factory.

Q: How to buy?
A: send out us inquiry → obtain our quotation → negotiate detai EPT → validate the sample → signal agreement/deposit → mass creation → cargo all set → equilibrium/shipping → further cooperation

Q: How about Sample buy?
A: Sample is obtainable for you. make sure you contact us for specifics. As soon as we charge you sample price, remember to feel straightforward, it would be refund when you spot formal get.

Q: How lengthy is the deliver[Creating] and transport?
A: Produce time is dependent on the quantity you buy. normally it normally takes fifteen-twenty five working days.

Q: My deal has missing merchandise. What can I do?
A: Please contact our assistance group and we will validate your purchase with the package deal contents. We apologize for any inconveniences.

Q: How to verify the payment?
A: We settle for payment by T/T, PayPal, the EPT payment methods also could be acknowledged, Make sure you speak to us just before you pay out by the EPT payment techniques. Also 30-fifty% deposit is accessible, the balance income must be paid ahead of transport. If you have an EPT question, p EPT truly feel free of charge to speak to us.

The use of unique equipment manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our firm and the shown substitute parts contained herein are not sponsored, accepted, or produced by the OEM.

300W  made in China - replacement parts -  in Ibague Colombia  104mm 220V Electric AC Induction Motor with Fan with ce certificate top quality low price

300W  made in China - replacement parts -  in Ibague Colombia  104mm 220V Electric AC Induction Motor with Fan with ce certificate top quality low price

300W  made in China - replacement parts -  in Ibague Colombia  104mm 220V Electric AC Induction Motor with Fan with ce certificate top quality low price

AC price made in China – replacement parts – in Novosibirsk Russian Federation 600kg Roller Door Motor with Remote Control with top quality

AC  price  made in China - replacement parts -  in Novosibirsk Russian Federation  600kg Roller Door Motor with Remote Control with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 distinct branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

MODEL          RATED Energy(w) LIFTING Electrical power(kg.f) RATED    LOAD MAX Peak(m) Rated Voltage(V)
outputtorque(n/m) outputspeed(r/min)
TH-three hundred-1P 200 three hundred 168 five.two 6 220V
 TH-four hundred-1P 250 four hundred 168 5,.2 6 20V
 TH-five hundred-1P 250 500 343 6.two six 220V
TH-600-1P 370 600 412 five.two six 220V
TH-800-1P four hundred 800 647 three.4 9 220V
TH-one thousand-1P 400 one thousand 1102 6.5 nine 220V
TH-800-3P 300 800 647 3.4 nine 380V
TH-one thousand-3P four hundred 1000 1102 six.five nine 380V
TH-1300-3P 600 1300 1372 six.five nine 380V
TH-1500-3P 600 1500 1610 five.seven nine 380V
  DC 24V
DC 300KG 200 three hundred 168 3.7 6 220V
DC 500KG 240 five hundred 343 four.6 six 220V
DC 600KG 240 600 412 four.two nine 220V
DC-800KG 380 800 647 3.9 nine 220V

Characteristics :
1.Compact construction,huge torque,and operating without sounds.
2.With the nationwide patent of Chain-crack safety.
3.The motor will not burn off down for the security of thermal impact
four.Independent circuit handle ensures the security
5.Security brake,exact restricted handle positioning,with double limit change protection, stop doorway more than roll-up. 
six.UPS automated system is accessible,No hassle of electrical power failure
7.Can work with remote controller
8.Effortless to put in, easy to servicing and extended beneficial daily life.

Packaging & Delivery (Pac ept Details: Two cartons for each established: 1 for motor , one for bracket .
Shipping and delivery Information: Shipping and delivery in 20 operate times following obtained the deposit

Our Provider:
Any inquiry/query will be reply in 24 several hours for the duration of wor ept days.
Sample purchase is available.
OEM for buyers is available.

Make contact with individual:

Ms.Cynthia

HangZhou Xihu (West Lake) Dis.ng Motor Co.,Ltd

 

Mobile:86~13083988828 138581177780 5588 6852 

 

The use of authentic products manufacturer’s (OEM) element figures or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our organization and the detailed replacement parts contained herein are not sponsored, accepted, or produced by the OEM.

AC  price  made in China - replacement parts -  in Novosibirsk Russian Federation  600kg Roller Door Motor with Remote Control with top quality

AC  price  made in China - replacement parts -  in Novosibirsk Russian Federation  600kg Roller Door Motor with Remote Control with top quality