China Coaxial Output Cycloidal Gearbox with Foot Mounting cycloidal drive dimensions

Solution Description

Starshine Generate Cycloid Geared Motor Characteristics

1. Functions:
1. Sleek operating,lower noise equipment tooth needle far more engagement.
two. Cycloidal tooth profile offers a high get in touch with ratio to stand up to overload shocks
three. Compact dimensions: one ratio available from 1/9 to 1/87, double phase up from 1/ninety nine to 1/7569 
4. Perfect for dynamic apps: repeated start off-stop-reversing obligations suits for cyclo pace reducer because inertia is lower
5. Minimize maintenance expenses: substantial dependability, lengthy daily life, minimal servicing in comparison to typical gearboxes
six. Interior elements replaceable with other manufacturers to make sure operating.

7. Grease Lubricated & Oil Lubricated Versions Available
eight. Output Shaft Rotation Route: Solitary Reduction: Clockwise Rotation Double Reduction→ Counter Clockwise Rotation
9. Ambient Conditions: Indoor Set up:10-40 Celsius, Max eighty five% Humidity, Underneath 1000m Altitude, Nicely Ventilated Setting, Free of corrosive,        explosive gases, vapors and dust
10.Sluggish Velocity Shaft Route: Horizontal, Vertical Up & Down, Common Path
11.Mounting Style: Foot Mount, Flange Mount & Vertical F-flange Mount,
12. Input Relationship: Cyclo Integral Motor, Hollow Input Shaft Adapter
thirteen. Coupling Approach With Pushed Equipment: Coupling, Gears, Chain Sprocket Or Belt
fourteen. Cycloid reducer Capacity Assortment: .37kW ~ 11kW

two. Specialized parameters

Sort Aged Type Output Torque Output Shaft Dia.
SXJ00 JXJ00 98N.m φ30
SXJ01 JXJ01 221N.m φ35
SXJ02 JXJ02 448N.m φ45
SXJ03 JXJ03 986N.m φ55
SXJ04 JXJ04 1504N.m φ70
SXJ05 JXJ05 3051N.m φ90
SXJ06 JXJ06 5608N.m φ100

About Us

ZheJiang CZPT Travel Co.,Ltd,the predecessor was a state-owned  mould company, was recognized in 1965. CZPT specializes in the complete electrical power transmission solution for high-finish products producing industries dependent on the intention of “System Solution, Software Design and Skilled Provider”.
Starshine have a strong technical pressure with above 350 personnel at existing, including above thirty engineering technicians, thirty good quality inspectors, covering an region of 80000 square CZPT and types of advanced processing machines and screening equipments. We have a good foundation for the sector application advancement and service of higher-stop pace reducers & variators proudly owning to the provincial engineering technologies analysis center,the lab of gear pace reducers, and the base of modern day R&D.

Our Staff

Quality Management
Good quality:Insist on Advancement,Attempt for CZPT With the development of equipment producing indurstry,consumer by no means satirsfy with the present high quality of our items,on the opposite,wcreate the worth of high quality.
Good quality coverage:to boost the general amount in the discipline of electrical power transmission  
Top quality Look at:Constant Improvement , pursuit of excellence
Good quality Philosophy:Quality produces benefit

3. Incoming Top quality Handle
To build the AQL satisfactory degree of incoming materials manage, to give the material for the complete inspection, sampling, immunity. On the acceptance of qualified goods to warehousing, substandard goods to consider return, check out, rework, rework inspection dependable for monitoring negative, to monitor the supplier to consider corrective 
steps to avoid recurrence.

four. Process Quality Handle
The production internet site of the first evaluation, inspection and ultimate inspection, sampling in accordance to the requirements of some assignments, judging the good quality alter pattern
 found abnormal phenomenon of producing, and supervise the manufacturing division to enhance, eradicate the abnormal phenomenon or state.

five. FQC(Final QC)
Following the manufacturing department will comprehensive the merchandise, stand in the customer’s situation on the concluded merchandise good quality verification, in buy to ensure the quality of 
customer expectations and wants.

6. OQC(Outgoing QC)
After the merchandise sample inspection to decide the certified, permitting storage, but when the completed merchandise from the warehouse prior to the formal shipping of the items, there is a check, this is referred to as the cargo inspection.Check content:In the warehouse storage and transfer standing to validate, while confirming the shipping of the 
solution is a product inspection to decide the competent goods.

7. Certification.

Packing

Shipping

 


/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Cycloidal Pin
Step: Single-Step

###

Customization:
Available

|


###

Type Old Type Output Torque Output Shaft Dia.
SXJ00 JXJ00 98N.m φ30
SXJ01 JXJ01 221N.m φ35
SXJ02 JXJ02 448N.m φ45
SXJ03 JXJ03 986N.m φ55
SXJ04 JXJ04 1504N.m φ70
SXJ05 JXJ05 3051N.m φ90
SXJ06 JXJ06 5608N.m φ100

/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Cycloidal Pin
Step: Single-Step

###

Customization:
Available

|


###

Type Old Type Output Torque Output Shaft Dia.
SXJ00 JXJ00 98N.m φ30
SXJ01 JXJ01 221N.m φ35
SXJ02 JXJ02 448N.m φ45
SXJ03 JXJ03 986N.m φ55
SXJ04 JXJ04 1504N.m φ70
SXJ05 JXJ05 3051N.m φ90
SXJ06 JXJ06 5608N.m φ100

How to Use a Cyclone Gearbox

Often, a cycloidal gearbox is used in order to achieve a torque transfer from a motor or pump. This type of gearbox is often a common choice as it has a number of advantages over a regular gearbox. Its main advantage is that it is easy to make, which means that it can be incorporated into a variety of applications. However, if you want to use a cycloidal gearbox, there are a few things that you need to know. These include the operation principle, the structure and the dynamic and inertial effects that come with it.helical gearbox

Dynamic and inertial effects

Several studies have been carried out on the static and dynamic properties of cycloidal gears. The study of these effects is beneficial in assisting optimal design of cycloidal speed reducers.
In this paper, the dynamic and inertial effects of a two-stage cycloidal speed reducer have been investigated using the CZPT program package. Moreover, a new model for cycloidal reducers based on non-linear contact dynamics has been developed. The new model aims to predict several operational conditions.
The normal excitation contact force for the cycloid discs of the first and second stage is very similar. However, the total deformation at the contact point is different. This effect is mainly due to the system’s own oscillations. The cycloid discs of the second stage turn around the ring gear roller with a 180deg angle. This angle is a significant contributor to the torque loads. The total excitation force on the cycloid discs of first and second stage is 1848 N and 2068.7 N, respectively.
In order to analyze the contact stress, different gear profiles were investigated. The mesh density was considered as an important design criterion. It was found that a bigger hole reduces the material content of the cycloidal disc and results in more stresses.
Moreover, it is possible to reduce the contact forces in a more efficient manner by changing the geometric parameters. This can be done by mesh refinement along the disc width. The cycloidal disc has the greatest influence on the output results.
The efficiency of a cycloidal drive increases with the increase in load. The efficiency of a cycloidal reducer also depends on the eccentricity of the input shaft and the cycloidal plate. The efficiency curve for small loads is linear. However, for the larger loads, the efficiency curve becomes more non-linear. This is because the stiffness of the cycloid reducer increases as the load increases.

Structure

Despite the fact that it looks like a complicated engineering puzzle, the construction of a cycloidal gearbox is actually quite simple. The key elements are the base, the load plate and the thrust bearing. All these elements work together to create a stable, compact gearbox.
The base is a circular section with several cylindrical pins around its outer edge. The pins are fixed on a fixed ring that holds them in a circular path. The ring serves as a reference circle. The circle’s size is approximately 5mm in diameter.
The load plate is a series of threaded screw holes. These are arranged 15mm away from the center. These are used to anchor external structures. The load plate must be rotated around the X and Y axis.
The thrust bearing is placed on top of the load plate. The bearing is made of an internal diameter of 35mm and an external diameter of 52mm. It is used to allow rotation around the Z axis.
The cycloidal disc is the centerpiece of the cycloidal gearbox. The disc has holes for the pins that drive the output shaft. The holes are larger than those used in output roller pins. The disc also has a reduced eccentricity.
The pins are attached to the cycloidal disc by rolling pins. The pins are made of a material that provides mechanical support for the drive during high-torque situations. The pins have a 9mm external diameter. The disc has a number of lobes and is rotated by one lobe per shaft revolution.
The cycloidal gearbox also has a top cover that helps keep the components together. The cover has a pocket for tools. The top cover also has threads that screw into the casing.helical gearbox

Operation principle

Among many types of gear transmissions, cycloidal gearboxes are used in heavy machinery and multi-axis robots. They are highly effective, compact and capable of high ratios. In addition, they have an overload capability.
Cycloid disks are driven by eccentric shafts that rotate around fixed ring pins. Roller pins of the pin disc engage with holes in the cycloidal disc. These roller pins drive the pin disc and the pin disc transfers the motion to the output shaft.
Unlike conventional gear drives, cycloidal drives have low backlash and high torsional stiffness. They are ideally suited to heavy loads and all drive technologies. The lower mass and compact design of the cycloidal disk also contributes to its high efficiency and positioning accuracy.
The cycloidal disc plays a central role in the gearbox kinematics. It rotates around a fixed ring in a circle. When the disc is pushed against the ring gear, the pins engage with the disc and the roller pins rotate around the pins. This rotating motion generates vibration, which travels through the driven shafts.
Cycloid discs are typically designed with a short cycloid, so that the eccentricity is minimized. This reduces unbalance forces at high speeds. Ideally, the number of lobes on the cycloid is smaller than the number of surrounding pins. This reduces the amount of Hertzian contact stress.
Unlike planetary gears, cycloidal gears have high accuracy and are capable of withstanding shock loads. They also experience low friction and less wear on tooth flanks. They also have higher efficiency and load capacity.
Cycloid gears are generally more difficult to manufacture than involute gears. Cycloid gears are not suitable for stacking gear stages. They require extreme accuracy for manufacturing. However, their smaller size and low backlash, high torsional stiffness, and low vibration make them ideal for use in heavy machines.

Involute gear tooth profile

Almost all gears are manufactured with an involute gear tooth profile. Cycloid gears are also produced with this profile. Compared with involute gears, cycloid gears are stronger and can transmit more power. However, they can also be more difficult to manufacture. This makes them costlier.
The involute gear tooth profile is a smooth curve. It is derived from the involute curve of a circle. A tangent to the base circle is the normal at any point of an involute.
This curve has properties that allow the involute gear teeth to transfer motion in perpendicular direction. It is also the path traced by the end of the string unwrapping from a cylinder.
An involute profile has the advantage of being easy to manufacture. It also allows for smooth meshing despite misalignment of the centre distance. This profile is also preferred over a cycloid tooth profile, but it is not the best in every regard.
Cycloid gear teeth are also made of two curves. Unlike involute teeth, cycloid gear teeth have a consistent radius. Cycloid gears are less likely to produce noise. But they are also more expensive to manufacture.
Involute teeth are easier to manufacture because they have only one curve. Cycloid gears can also be made with a rack type cutter. This makes them cheaper to manufacture. However, they require an expert design. They can also be manufactured with a gear shaper that includes a pinion cutter.
The tooth profiles that satisfy the law of gear-tooth action are sometimes called conjugate profiles. The involute profile is the most common of these. It allows for constant torque transmission.helical gearbox

Backlash

Typically, cycloidal drives provide a high ratio of transmission with no backlash. This is because the cycloid disc is driven by an eccentric shaft. During rotation, the cycloid disc rotates around a fixed ring. This ring also rotates independently of the center of gravity.
The cycloid disc is typically shortened to reduce the eccentricity. This helps to minimize the unbalance forces that may occur at high speeds. The cycloid also offers a larger gear ratio than traditional gears. This provides a better positional accuracy.
Cycloid drives also have a high torsional stiffness. This provides greater torsional resilience and shock load capabilities. This is important for a number of reasons, such as in heavy-duty applications.
Cycloid drives also have lower mass. These benefits make them ideally suited for all drive technologies. The design also allows for higher torsional stiffness and service life. These drives also have a much smaller profile.
Cycloid drives are also used to reduce speed. Because of the high torsional stiffness of the cycloid, they also have high positioning accuracy.
Cycloid drives are well-suited to a variety of applications, including electric motors, generators, and pump motors. They are also highly resistant to shock loads, which is important in a variety of applications. This design is ideal for applications that require a large transmission ratio in a compact design.
Cycloid drives also have the advantage of minimizing the clearance between the mating components. This helps to eliminate interference and ensure a positive fit. This is particularly important in gearboxes. It also allows for the use of a load cell and potentiometer to determine the backlash of the gearbox.
China Coaxial Output Cycloidal Gearbox with Foot Mounting     cycloidal drive dimensionsChina Coaxial Output Cycloidal Gearbox with Foot Mounting     cycloidal drive dimensions
editor by CX 2023-03-27

Leave a Reply

Your email address will not be published. Required fields are marked *